View source for HD Phone Config on 1000

<br/>[[HD Phones#Manual|Use HD Phones "'''Manual'''" Configuration to install HD Phones onto an IP1000]]

This method involves programming from the phone manually and should be avoided if possible due to the time involved. It is always best to program the phone from the PBX via one of the methods mentioned above.

#Create an extension in the PBX
#Log into the IP address of the phone
#Click Config Guide
#Click Next which takes you to the network page, no changes should be necessary on this page
#Click Next which takes you to the Account page
##Username = Extension Number
##Password = SIP Password
##SIP Server = IP address of the PBX
#Click Finish and the phone will be configured to the PBX in a basic manner
#Navigate to Advanced=>Phone Setting
##Set Called No Answer Time to 99, then uncheck the box
##Set Pickup Code to 99
##Set Message to 923
##Change Set Time Mode to SNTP
##Select Manual for SNTP Time Server and enter the IP address of the PBX or a time server such as time.nist.gov
##Set Daylight Savings, Time Format, and Time Zone accordingly
##Set BLF Light to Off
#Click Submit
#Manually Program keys as per the users desire.