Chat - Revision history

Mike Lunn: /* Configuring Chat */

2015-12-18T18:45:41Z

Configuring Chat

Mike Lunn: /* Configuring Chat */

2015-12-18T18:44:22Z

Configuring Chat

Mike Lunn at 21:00, 29 January 2015

2015-01-29T21:00:55Z

Mike Lunn at 19:23, 23 July 2014

2014-07-23T19:23:32Z

Mike Lunn: /* Configuring Bria XMPP for Chat */

2014-07-23T19:03:23Z

Configuring Bria XMPP for Chat

Mike Lunn at 15:25, 23 July 2014

2014-07-23T15:25:09Z

Mike Lunn at 12:45, 12 July 2013

2013-07-12T12:45:25Z

Mike Lunn at 14:55, 9 July 2013

2013-07-09T14:55:29Z

Mike Lunn: Created page with "The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat. This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP.&..."

2013-07-08T15:24:34Z

Created page with "The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat. This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP.&..."

New page

The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat.  This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP. 

[[File:PBXSetup-Chat.jpg|File:PBXSetup-Chat.jpg]]

In order to use this feature, you must ensure that Enable Chat Server is set to YES and Chat Server Status should say Running.  Once this is done, Apply Changes and you will be able to start using the built in chat feature on your XMPP ready devices and programs.

@@ Line 18: / Line 18: @@
 *Host/Server: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.
 *Domain: localhost
 == Configuring Bria XMPP for Chat<br/> ==

@@ Line 16: / Line 16: @@
 *UserName: Extension Number
 *Password: Voicemail PIN
-*Host/Server/Domain: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.
+*Host/Server: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.
 == Configuring Bria XMPP for Chat<br/> ==

@@ Line 1: / Line 1: @@
 {{IP_PBX_Manual|sortkey=Chat}} '''Chat'''
-The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat.&nbsp; This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP.&nbsp;
+The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat.&nbsp; This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP.  As with many services in the PBX, XMPP has a default ACL limiting what networks are permitted to communicate to the PBX.  Be sure the IP scheme you will be coming from is included in the ACL for XMPP or it will not function.&nbsp;
 [[File:PBXSetup-Chat.jpg|File:PBXSetup-Chat.jpg]]

@@ Line 18: / Line 18: @@
 *Host/Server/Domain: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.
-== Configuring Bria XMPP for Chat ==
+== Configuring Bria XMPP for Chat<br/> ==
 *Step 1 - Create an extension on the system. If you have set up your Bria already, use that extension and create an XMPP Account on your Accounts tab.

@@ Line 18: / Line 18: @@
 *Host/Server/Domain: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.
-==Configuring Bria XMPP for Chat==
+== Configuring Bria XMPP for Chat ==
 *Step 1 - Create an extension on the system. If you have set up your Bria already, use that extension and create an XMPP Account on your Accounts tab.
 *Step 2 - Enter you ext number as the username and PIN as the password.
 *Step 3 - Enter the word localhost for domain
 *Step 4 - Click the advanced tab
 *Step 5 - Enter in the IP address of the IPitomy PBX System. If you are using 3/4g you will need to use the external static IP address or Domain name. If using local wifi, you can use the inter LAN address.
-*Step 6 - It is best to set this up on the external address so it will work while outside of the  building. To complete the connection, you will need to forward port 5222 to the internal IP address of the IPitomy PBX System in the Router/Firewall.
+*Step 6 - It is best to set this up on the external address so it will work while outside of the building. To complete the connection, you will need to forward port 5222 to the internal IP address of the IPitomy PBX System in the Router/Firewall.
 *Step 7 - Assign a Qmanager Account to this extension in PBX Setup - Services
 *Step 8 - Log into Qmanager using the extension and pin for this extension and enable chat. After enabling the chat account you can log out of the Qmanager account for this extension.
 You should now see this extension in Qmanager with the Blue text messaging icon. Your Bria should be ready to send/receive chat messages to your colleagues desktops from your mobile smart phone as well as receive presence status updates.

← Older revision		Revision as of 15:25, 23 July 2014
Line 17:		Line 17:
	*Password: Voicemail PIN		*Password: Voicemail PIN
	*Host/Server/Domain: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.		*Host/Server/Domain: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.
		+
		+	==Configuring Bria XMPP for Chat==
		+
		+	*Step 1 - Create an extension on the system. If you have set up your Bria already, use that extension and create an XMPP Account on your Accounts tab.
		+	*Step 2 - Enter you ext number as the username and PIN as the password.
		+	*Step 3 - Enter the word localhost for domain
		+	*Step 4 - Click the advanced tab
		+	*Step 5 - Enter in the IP address of the IPitomy PBX System. If you are using 3/4g you will need to use the external static IP address or Domain name. If using local wifi, you can use the inter LAN address.
		+	*Step 6 - It is best to set this up on the external address so it will work while outside of the building. To complete the connection, you will need to forward port 5222 to the internal IP address of the IPitomy PBX System in the Router/Firewall.
		+	*Step 7 - Assign a Qmanager Account to this extension in PBX Setup - Services
		+	*Step 8 - Log into Qmanager using the extension and pin for this extension and enable chat. After enabling the chat account you can log out of the Qmanager account for this extension.
		+
		+	You should now see this extension in Qmanager with the Blue text messaging icon. Your Bria should be ready to send/receive chat messages to your colleagues desktops from your mobile smart phone as well as receive presence status updates.

← Older revision		Revision as of 12:45, 12 July 2013
Line 1:		Line 1:
		+	{{IP_PBX_Manual\|sortkey=Chat}} '''Chat'''
		+
	The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat.  This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP.		The PBX has a built in jabber/XMPP chat client found under PBX Setup=>Chat.  This allows you to configure DCM, QManager, and other chat clients that support jabber/XMPP.

← Older revision		Revision as of 14:55, 9 July 2013
Line 6:		Line 6:

	In order to use this feature, you must ensure that Enable Chat Server is set to YES and Chat Server Status should say Running.  Once this is done, Apply Changes and you will be able to start using the built in chat feature on your XMPP ready devices and programs.		In order to use this feature, you must ensure that Enable Chat Server is set to YES and Chat Server Status should say Running.  Once this is done, Apply Changes and you will be able to start using the built in chat feature on your XMPP ready devices and programs.
		+
		+	==Configuring Chat==
		+
		+	If you are configuring Chat on your own XMPP/Jabber client to work with the PBX you will need to know the following:
		+
		+	*Port: 5222
		+	*UserName: Extension Number
		+	*Password: Voicemail PIN
		+	*Host/Server/Domain: LAN or WAN IP address of the PBX, depending on whether the chat client is on the LAN or coming in from remote.