Difference between revisions of "PBX Quick Start"

@@ Line 1: / Line 1: @@
 =='''Setup Checklist'''==
-Set PBX IP address according to final destination network.
+===Set PBX IP address according to final destination network.===
 [http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking]
@@ Line 7: / Line 7: @@
 &nbsp;
-IF pbx is set up with final network IP address, set up localnet, and then ACL
+===IF pbx is set up with final network IP address, set up localnet, and then ACL===
 [http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking#Access_Control_List http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking#Access_Control_List]
@@ Line 13: / Line 13: @@
 &nbsp;
-Create and register at least 2 extensions, place test call between them to ensure calls are working
+===Create and register at least 2 extensions, place test call between them to ensure calls are working===
 [http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro]
@@ Line 21: / Line 21: @@
 &nbsp;
-Build rest of extensions/destinations
+===Build rest of extensions/destinations===
 [http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro]
@@ Line 27: / Line 27: @@
 &nbsp;
-IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions
+===IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions===
 [http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery]
@@ Line 33: / Line 33: @@
 &nbsp;
-Set up trunks (SIP, PRI/Analog Card, Gateway, etc)
+===Set up trunks (SIP, PRI/Analog Card, Gateway, etc)===
 [http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders]
@@ Line 39: / Line 39: @@
 &nbsp;
-IF NEEDED, ensure router port forwarding OR 1:1 NAT is set up
+===IF NEEDED, ensure router port forwarding OR 1:1 NAT is set up===
 [http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig]
@@ Line 45: / Line 45: @@
 &nbsp;
-Test inbound and outbound calls
+===Test inbound and outbound calls===
-&nbsp;
-&nbsp;
-&nbsp;
-&nbsp;
-&nbsp;
-=='''IPitomy Quick Start Guide'''==
-&nbsp;
-===Step 1) Set PBX IP address according to final destination network.===
-By default, the IPitomy PBX ships with an IP address of 192.168.1.249
-Its administration interface, by default, is http://192.168.1.249/ippbx
-The default admin login is '''Username'''&nbsp;= pbxadmin&nbsp;'''Password'''&nbsp;= ipitomy
-When setting up the pbx for premise, you need to change the IP address according to the network you’ll be installing it on.
-'''STEPS:'''
-.&nbsp;&nbsp;&nbsp; Navigate to&nbsp;'''System Networking'''. The&nbsp;'''TCP/IP Settings'''&nbsp;page appears displaying the default values for the following setting:
-'''IP Address'''
-'''Subnet Mask'''
-'''Default Gateway'''
-'''Static DNS'''
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;'''IP Address'''&nbsp;field. Enter the&nbsp;'''IP address'''&nbsp;for the Router.&nbsp;'''Use the default address (192.168.1.249)'''&nbsp;of the IPitomy IP PBX or an address outside the range of existing IP addresses assigned by DHCP in the router Enter the desired IP Address. See Table above for recommended settings.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;'''Subnet Mask&nbsp;'''field.&nbsp;'''Leave the default setting for the Subnet Mask as (255.255.255.0)'''. See Table above for recommended settings.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;Default Gateway'''&nbsp;field. Change the default Gateway value to the desired target network. See Table above for recommended settings.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;Static DNS'''&nbsp;field. Change the default DNS value to the desired target network. See Table above for recommended settings.
-.&nbsp;&nbsp;&nbsp; Repeat&nbsp;step 5'''&nbsp;to set the remaining DNS values, if necessary.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;Save Changes'''&nbsp;button
-.&nbsp;&nbsp;&nbsp;&nbsp; Click the&nbsp;'''Apply Changes'''&nbsp;link located on the right hand corner of the page, to commit the changes to the database.
-&nbsp;
-===Step 2) IF pbx is set up with final network IP address, set up localnet, and then ACL===
-If you are setting up the PBX in your office and then transporting it to your customer’s premise later, DO NOT set up phones yet.&nbsp; Wait until you are onsite.&nbsp; You can create extensions before delivery but do not assign the phones.&nbsp; Also do not load the recommended defaults for the Access Control List until you are onsite with the pbx set up for its destination network, as it will create rules based on its existing network settings, and may lock you out of it if you are not on the correct network.
-Once you are onsite with the pbx set up on the destination network, then you should load recommended defaults as follows:
-'''STEPS:'''
-.&nbsp;&nbsp;&nbsp; Navigate to PBX Setup->SIP
-.&nbsp;&nbsp;&nbsp; Set the LocalNet to match the network the PBX is installed on, Save, and Apply Changes
-.&nbsp;&nbsp;&nbsp; Navigate to the&nbsp;'''Access Control List'''&nbsp;page, click&nbsp;'''Load Recommended Default'''&nbsp;button. This will create default rules allowing the PBX to communicate to devices on the LocalNet in regards to SIP, Call Manager, and TFTP
-.&nbsp;&nbsp;&nbsp; Click the&nbsp;'''Apply Changes'''&nbsp;link located on the right hand corner of the page, to commit the changes to the database.
-If the network is not a 192.168.1.x network, connect a monitor and keyboard to the pbx, boot up the pbx, and on the login screen, press CTRL-ALT-F7 to access a basic configuration page directly.
-&nbsp;
-===Step 3) Create and register at least 2 extensions, place test call between them to ensure calls are working===
-'''STEPS:'''
-.&nbsp;&nbsp;&nbsp; From any page of the PBX Admin system, click on the button next to the&nbsp;'''Destinations'''&nbsp;link to expand the menu. The&nbsp;'''Destination'''&nbsp;menu opens and displays the options available.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;'''Extensions'''&nbsp;link. The Extensions page opens and displays a listing of extensions (if ones already exists).
-.&nbsp;&nbsp;&nbsp; Click on the box to the left of the&nbsp;'''Extensions&nbsp;'''field. This value defaults to “'''10'''”. Enter the number of extensions you want to add and then click the&nbsp;'''ADD'''&nbsp;button.
-.&nbsp;&nbsp;&nbsp; The&nbsp;'''Create Extensions'''&nbsp;page appears displaying the number of rows that was specified. Enter information for the extension in these fields. See table above for details.
-You can have the system automatically number the extensions you want to create by clicking the&nbsp;'''AutoNumber'''&nbsp;checkbox located on the top left hand corner of the&nbsp;'''Create Extensions'''&nbsp;page.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;'''CREATE'''&nbsp;button when all the extension information you want to create is entered. The system responds with a message indicating the results of adding the new extension(s). You should see a “'''SUCCESS'''” message.
-.&nbsp;&nbsp;&nbsp; If there is an error, you will see an “'''ERROR'''” indicated under the Results field. An error is typically due to an extension number that is being duplicated (already existing in the system). Make the necessary adjustments to correct the error then click the&nbsp;'''CREATE'''&nbsp;button.
-.&nbsp;&nbsp;&nbsp; Click on the&nbsp;&nbsp;button, to save the changes.
-.&nbsp;&nbsp;&nbsp; Select the&nbsp;'''Apply Changes'''&nbsp;link located on the right hand corner of the page, to commit the changes to the database.
-&nbsp;
-'''STEPS:'''
-.&nbsp;&nbsp;&nbsp; From the&nbsp;'''Destination'''=>'''Extensions'''&nbsp;page, click the&nbsp;'''Auto-Discovery Tab'''.
-.&nbsp;&nbsp;&nbsp; Select to either Scan or Not Scan the network and an Alert message indicating that the system is scanning the network for active devices appears.
-.&nbsp;&nbsp;&nbsp; Once the scanning process is complete, the system will display a list of active devices and assigned values such as IP Address, Device Type, Status, etc. Devices that appear on this list may be selected for editing. By default, the PBX will only display IPitomy and Aastra devices. Filter options can be modified to change display other devices.
-You can then assign an extension to each phone found.
-'''STEPS:'''
-.&nbsp;&nbsp;&nbsp; From the&nbsp;'''Extensions'''=>'''Destinations'''=>'''Auto-Discovery&nbsp;'''page, click the&nbsp;'''Edit Selected&nbsp;'''tab.
-.&nbsp;&nbsp;&nbsp; Place a check mark next to the phones you wish to use when creating the extensions
-.&nbsp;&nbsp;&nbsp; Click the&nbsp;'''Create'''&nbsp;button.
-.&nbsp;&nbsp;&nbsp; Enter the new extension information. The MAC addresses of the selected phones will be populated so you have a reference as to what phones you are creating the extensions for.
-.&nbsp;&nbsp;&nbsp; Click the “'''Create'''” button. If successful, Click “'''Return to Extensions'''”
-.&nbsp;&nbsp;&nbsp; Click the&nbsp;'''Apply Changes'''&nbsp;link located at the right hand corner of the top of the page, to commit the changes to the database.
-.&nbsp;&nbsp;&nbsp; Click the “'''Auto-Discovery'''” button and you will note the newly created extensions are now assigned to the phones that were checked.
-.&nbsp;&nbsp;&nbsp; Check the boxes next to the phones that you just created extensions for.
-.&nbsp;&nbsp;&nbsp; Click the Commands Tab.
-Click on the&nbsp;'''Configure & Restart'''&nbsp;button to provision the phones.
-===Step 4) Build rest of extensions/destinations</u>===
-All other programming, ring groups, queues, individual extensions can be created at this point.
-&nbsp;
-===Step 5) IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions===
-Assign the rest of the phones as needed.
-===Step 6) Set up trunks (SIP, PRI/Analog Card, Gateway, etc)===
-[http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders]
-Follow the above link for different types of trunks, as each type requires a different set of instructions.
-&nbsp;
-===Step 7) Ensure router port forwarding OR 1:1 NAT is set up if needed===
-If
-Every router is different.&nbsp; Please refer to this guide for general information: [http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig]
-The following ports should be forwarded at a minimum:&nbsp; 5060 TCP, 10000-20000 TCP/UDP
-&nbsp;
-===Step 8) Test inbound and outbound calls===