Difference between revisions of "Cisco SPA112 FXS Gateway"
Jump to navigation
Jump to search
(Created page with "By default, the Cisco SPA112 will pull DHCP from your network. If there is no DHCP, it will have a self assigned IP of 192.168.15.1.") |
|||
| Line 1: | Line 1: | ||
| − | By default, the Cisco SPA112 will pull DHCP from your network. If there is no DHCP, it will have a self assigned IP of 192.168.15.1. | + | By default, the Cisco SPA112 will pull DHCP from your network. If there is no DHCP, it will have a self assigned IP of 192.168.15.1. You can discern the IP address via Autodiscovery if you switch the Filter to None, or by viewing the DHCP leases in the router. |
| + | |||
| + | ==Configuration== | ||
| + | *Log into the IP address of the Gateway (user: admin | pass: admin) | ||
| + | *Navigate to Quick Setup | ||
| + | *Line 1 and Line 2 will be where you configure your SIP extensions from the PBX as follows: | ||
| + | **Proxy: IP address of the PBX | ||
| + | **Display Name: Extension Number | ||
| + | **User ID: Extension Number | ||
| + | **Password: SIP Password for the extension | ||
| + | *Click Submit | ||
| + | |||
| + | Once this is completed, the extension should be registered and functional. | ||
| + | |||
| + | '''NOTE''' | ||
| + | If you are configuring multiple extensions to the Gateway, be sure to set them in the PBX to UserType = Friend. | ||
Revision as of 20:06, 14 August 2012
By default, the Cisco SPA112 will pull DHCP from your network. If there is no DHCP, it will have a self assigned IP of 192.168.15.1. You can discern the IP address via Autodiscovery if you switch the Filter to None, or by viewing the DHCP leases in the router.
Configuration
- Log into the IP address of the Gateway (user: admin | pass: admin)
- Navigate to Quick Setup
- Line 1 and Line 2 will be where you configure your SIP extensions from the PBX as follows:
- Proxy: IP address of the PBX
- Display Name: Extension Number
- User ID: Extension Number
- Password: SIP Password for the extension
- Click Submit
Once this is completed, the extension should be registered and functional.
NOTE If you are configuring multiple extensions to the Gateway, be sure to set them in the PBX to UserType = Friend.