Difference between revisions of "Yealink"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
== Additional programming tips: == | == Additional programming tips: == | ||
| + | ===Keys=== | ||
*When configuring the Park key manually, set the type to DTMF, and the value to ##700#. | *When configuring the Park key manually, set the type to DTMF, and the value to ##700#. | ||
*When configuring a Record key manually, set the type to DTMF, and the value to *# | *When configuring a Record key manually, set the type to DTMF, and the value to *# | ||
| Line 10: | Line 11: | ||
*Under the DDS key tab is a link for Line Keys. Be sure to set the Line Keys to Account 1 if you want them to function as a line key, otherwise you can configure them just like any other programmable key. | *Under the DDS key tab is a link for Line Keys. Be sure to set the Line Keys to Account 1 if you want them to function as a line key, otherwise you can configure them just like any other programmable key. | ||
| − | |||
| − | ==Multicast== | + | ===Multicast=== |
To set up multicast on your Yealink phone: | To set up multicast on your Yealink phone: | ||
*Log into GUI interface of phone via IP Address | *Log into GUI interface of phone via IP Address | ||
| Line 19: | Line 19: | ||
**eg. 225.5.5.5:1235 | **eg. 225.5.5.5:1235 | ||
*Populate the Label field with a name that will display on the LCD when paged by the multicast group | *Populate the Label field with a name that will display on the LCD when paged by the multicast group | ||
| + | |||
| + | ===Fixes=== | ||
| + | *T38G firmware version fixes an issue with Parked calls bonding with other calls incorrectly. Extract the .rom from the Zip folder and load it into the phone. | ||
[[File:38.70.0.143.zip|File:38.70.0.143.zip]] | [[File:38.70.0.143.zip|File:38.70.0.143.zip]] | ||
Revision as of 15:56, 7 November 2013
Manual Configuration Guide
Additional programming tips:
Keys
- When configuring the Park key manually, set the type to DTMF, and the value to ##700#.
- When configuring a Record key manually, set the type to DTMF, and the value to *#
- When configuring the Day/Night key manually, set the type to BLF and the value to ff.
- Under the DDS key tab is a link for Line Keys. Be sure to set the Line Keys to Account 1 if you want them to function as a line key, otherwise you can configure them just like any other programmable key.
Multicast
To set up multicast on your Yealink phone:
- Log into GUI interface of phone via IP Address
- Navigate to Contacts=>MulticastIP
- Populate the Listening Address field with the mutlicast IP of the multicast group built in the PBX, follower by a colon and the port configured for the group.
- eg. 225.5.5.5:1235
- Populate the Label field with a name that will display on the LCD when paged by the multicast group
Fixes
- T38G firmware version fixes an issue with Parked calls bonding with other calls incorrectly. Extract the .rom from the Zip folder and load it into the phone.