Difference between revisions of "IPitomy SIP Trunk Configuration"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
| − | The Above is a Screen Cap from a working | + | The Above is a Screen Cap from a working IPitomy SIP trunk. We authenticate using your public IP. Set your trunk as shown in this document. |
NOTE: All calls must go out these trunks as 11 digits, so be sure to add Prefix Digits to the trunks for the 7-Digits and 10-Digit routes. | NOTE: All calls must go out these trunks as 11 digits, so be sure to add Prefix Digits to the trunks for the 7-Digits and 10-Digit routes. | ||
| Line 9: | Line 9: | ||
NOTE: When naming the SIP trunk, do not use any spaces, hyphens, underscores, or special characters. | NOTE: When naming the SIP trunk, do not use any spaces, hyphens, underscores, or special characters. | ||
| − | NOTE: When configuring the SIP ACL to allow | + | NOTE: When configuring the SIP ACL to allow IPitomy trunks to communicate to the PBX be sure to add the following: 8.38.53.40/30 so it includes 8.38.53.41 and 8.38.53.42. |
| − | NOTE: On initial set up leave Qualify under the SIP provider at 30000. Once you see on Monitoring that it goes green, you can set Qualify to 0 | + | NOTE: On initial set up leave Qualify under the SIP provider at 30000. Once you see on Monitoring that it goes green, you can set Qualify to 0. |
Revision as of 11:25, 31 October 2014
The Above is a Screen Cap from a working IPitomy SIP trunk. We authenticate using your public IP. Set your trunk as shown in this document.
NOTE: All calls must go out these trunks as 11 digits, so be sure to add Prefix Digits to the trunks for the 7-Digits and 10-Digit routes.
NOTE: When naming the SIP trunk, do not use any spaces, hyphens, underscores, or special characters.
NOTE: When configuring the SIP ACL to allow IPitomy trunks to communicate to the PBX be sure to add the following: 8.38.53.40/30 so it includes 8.38.53.41 and 8.38.53.42.
NOTE: On initial set up leave Qualify under the SIP provider at 30000. Once you see on Monitoring that it goes green, you can set Qualify to 0.