Difference between revisions of "Grandstream FXO FAQ"
Jump to navigation
Jump to search
When I call an outside party and the party puts me on hold with no music or sound, I am disconnected after 60 seconds. Is there a way to change this?
Drew Harrell (talk | contribs) |
Drew Harrell (talk | contribs) |
||
| Line 5: | Line 5: | ||
;On the FXO-Lines Page there is a setting called Silence Timeout. Set this value to however many seconds you wish to remain connected to a silent line. (A good setting would be 3600s a.k.a. 1 hour).<br/> | ;On the FXO-Lines Page there is a setting called Silence Timeout. Set this value to however many seconds you wish to remain connected to a silent line. (A good setting would be 3600s a.k.a. 1 hour).<br/> | ||
;<br/> | ;<br/> | ||
| − | |||
| − | + | = How do I ensure that the Grandstream is on the latest firmware? = | |
| − | # | + | |
| − | # | + | #Navigate to the Advanced Settings Page |
| − | # | + | #Ensure HTTP is selected for the method to upgrade |
| − | # | + | #Set Firmware Server Path: to firmware.grandstream.com |
| − | # | + | #Set Automatic Upgrade to YES |
| − | # | + | #Set Allow DHCP Option 66 to override server to No |
| − | # | + | #Click Update at the bottom of the page |
| − | + | #Click Reboot | |
| − | + | ||
| + | The upgrade may take as long as 20min when done through the internet, so allow plenty of time for this. While up- grading the LED will blink. When the LED returns to normal, the device has completed its upgrade. | ||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
| + | |||
</div></div></div></div> | </div></div></div></div> | ||
Revision as of 20:53, 4 September 2012
When I call an outside party and the party puts me on hold with no music or sound, I am disconnected after 60 seconds. Is there a way to change this?
- On the FXO-Lines Page there is a setting called Silence Timeout. Set this value to however many seconds you wish to remain connected to a silent line. (A good setting would be 3600s a.k.a. 1 hour).
How do I ensure that the Grandstream is on the latest firmware?
- Navigate to the Advanced Settings Page
- Ensure HTTP is selected for the method to upgrade
- Set Firmware Server Path: to firmware.grandstream.com
- Set Automatic Upgrade to YES
- Set Allow DHCP Option 66 to override server to No
- Click Update at the bottom of the page
- Click Reboot
The upgrade may take as long as 20min when done through the internet, so allow plenty of time for this. While up- grading the LED will blink. When the LED returns to normal, the device has completed its upgrade.