Difference between revisions of "IPitomy Communicator"
John Wolfe (talk | contribs) |
John Wolfe (talk | contribs) |
||
| Line 33: | Line 33: | ||
| − | Select the Add Button. | + | Select the Add Button. |
| Line 41: | Line 41: | ||
| − | Enter the Following | + | Enter the Following |
Display Name = Name of user | Display Name = Name of user | ||
| Line 81: | Line 81: | ||
Your Softphone is now ready to be used. | Your Softphone is now ready to be used. | ||
| − | + | ||
'''Import Extensions from the PBX to Contacts.''' | '''Import Extensions from the PBX to Contacts.''' | ||
| Line 99: | Line 99: | ||
| − | [[File: | + | [[File:SoftPhone14.jpg|File:SoftPhone14.jpg]] |
| − | Click OK. The Softphone will now pull down an Extension list from the PBX which you configured. | + | Click OK. The Softphone will now pull down an Extension list from the PBX which you configured. |
[[File:SoftPhone13.jpg|File:SoftPhone13.jpg]] | [[File:SoftPhone13.jpg|File:SoftPhone13.jpg]] | ||
Revision as of 17:06, 29 October 2014
Note: This Guide will assist the user in Installing and Using the Ipitomy Softphone.
Ipitomy Softphone
Installation
To Install the Softphone, Follow the URL below and click the Installer link. Installation will begin at that time. You should have adminstrative rights to the PC you are installing to prior to installation. Accept the default location for install unless you have some other directory you wish to install to.
Setup
Once isntalled open the program by clicking the program Icon. This should now be located on your Desktop as well as in the Program directory. The Program will open bringing up the user interface screen.
To Add an account Press the Settings Icon which is the little Gear Icon next to the Ipitomy Logo Bar. Select Sip Accounts and Add an Account
Select the Add Button.
Enter the Following
Display Name = Name of user
User Name = Extension Number
User Password = Voicemail Password
SIP Password = SIP Password for Extension
SIP Server = IP of PBX (Local IP is OK for a Local Extension only, however for a remote phone this would need to the Public IP of the Network the PBX resides upon)
All other information can be left at Default.
Be Sure to Click Enabled when you are returned to the account screen on the account you just created so it is made the live account
Click close and you should be returned to the User interface and your account should register to the PBX.
Your Softphone is now ready to be used.
Import Extensions from the PBX to Contacts.
To Import all Extension in the PBX into the Contact list select User List - Manage Users - Ipitomy and then Refresh
Select the PBX from the Host list
Click OK. The Softphone will now pull down an Extension list from the PBX which you configured.
