Difference between revisions of "Overhead Paging"
(Created page with "There are three possible methods to integrate overhead paging to the PBX; SIP, FXS, or FXO. ==SIP== Using a SIP based overhead paging device is the best option as the device ...") |
|||
| Line 2: | Line 2: | ||
==SIP== | ==SIP== | ||
| − | Using a SIP based overhead paging device is the best option as the device registers directly to the PBX as a SIP extension. This allows for the easiest integration as we do not need a gateway between the PBX and the paging device. | + | Using a SIP based overhead paging device is the best option as the device registers directly to the PBX as a SIP extension. This allows for the easiest integration as we do not need a gateway between the PBX and the paging device. In order to page, you will dial the SIP extension, and since it is registered as a SIP extension, you are also able to add the overhead to a paging ring group, along with the other extensions on the system. |
We have guides that go over the configuration of [http://www.ipitomy.com/webrelease/Valcom/ Valcom] and [http://www.ipitomy.com/webrelease/Cyberdata/ Cyberdata] SIP based paging devices. | We have guides that go over the configuration of [http://www.ipitomy.com/webrelease/Valcom/ Valcom] and [http://www.ipitomy.com/webrelease/Cyberdata/ Cyberdata] SIP based paging devices. | ||
| + | |||
| + | |||
| + | ==FXS== | ||
| + | An FXS paging device requires an FXS gateway ([http://www.ipitomy.com/webrelease/IPitomy/IPr20/IPr20-Quick_Guide.pdf IPr20], [http://www.ipitomy.com/webrelease/Linksys/Linksys-PAP2T-QuickGuide.pdf PAP2], [http://www.ipitomy.com/webrelease/Grandstream/Grandstream%204024%20Quick%20Guide.pdf Granstream], or [http://wiki.ipitomy.com/index.php/Cisco_SPA112_FXS_Gateway SPA112]) to integrate as a SIP extension and is the second best option. Again, you would dial the extension to page, or you can add the extension to a ring group and page overhead along with a group of phones. | ||
Revision as of 14:14, 24 August 2012
There are three possible methods to integrate overhead paging to the PBX; SIP, FXS, or FXO.
SIP
Using a SIP based overhead paging device is the best option as the device registers directly to the PBX as a SIP extension. This allows for the easiest integration as we do not need a gateway between the PBX and the paging device. In order to page, you will dial the SIP extension, and since it is registered as a SIP extension, you are also able to add the overhead to a paging ring group, along with the other extensions on the system.
We have guides that go over the configuration of Valcom and Cyberdata SIP based paging devices.
FXS
An FXS paging device requires an FXS gateway (IPr20, PAP2, Granstream, or SPA112) to integrate as a SIP extension and is the second best option. Again, you would dial the extension to page, or you can add the extension to a ring group and page overhead along with a group of phones.