Routing Ops

The Routing Ops feature allows inbound calls to route based on any one of the following

• Inbound CID
• Number Dialed
• Collected Digits

Routing Ops can be used in conjunction with a Group as a filter app, or you can set a Routing Op entry as a destination anywhere in the system. A Routing app basically consists of one or more ‘expressions’ that resolve to be either True or False. The Operation evaluates each expression sequentially in the defined order (priority). If an expression resolves as True, the caller is immediately routed to the configured route destination for that expression. If the condition is False, the Operation evaluates the next expression. If all expression evaluate to False, the Operation will perform the default behavior based on how the App was invoked (filter or destination). Note: A disabled Routing Operation skips all expressions and performs the ‘default behavior’ based on how the App was invoked.

Group Method

If the app is invoked as a Filter for a Group, the default behavior is to do nothing (i.e. stay in the group as if the filter was never invoked). Specifically, the ‘Default Destination’ field configured on the Route Operations Edit page is ignored.

Destination Method

If the app is invoked as a ‘Destination’, the default behavior is to route to the 'Default Destination’ field configured on the Route Operations Edit page.

Building a Routing Op

Field	Function	Default
Name	Name of the Routing Op.  You should rename to something clear that explains what the route does.	Routing Application
Operation Type	Can be set to Match List of Numbers (single variable, exact match) or Table Lookup (multivariable, exact match or mathmatical functions).  Once set, this cannot be changed.	Match List of Numbers.
Enabled	Toggle the Op ON or OFF	No
Prompt & Collect Digits	Defines if the system will prompt the caller to enter digits before evaluating expressions.  When you select Yes, additional fields are displayed.	No
Default Destination	Where a call will go if it does not meet a filtered status. (Destination method only, not needed for Group method)	None
Prompt to Play	Set this to a recorded prompt instructing the caller what digits to enter.  Only used when Prompt & Collect Digits is set to Yes.	1-sec-silence
Number of Digits to Collect	Total number of digits to collect. Only used when Prompt & Collect Digits is set to Yes.	4
Number of seconds to wait if no digits are entered	How long the system will wait for digits to be entered. Only used when Prompt & Collect Digits is set to Yes.	10
Number of Attempts to Allow Before Routing to the Failover Destination	How many tries the system will give the caller to enter their digits before routing to the Failover Destination. Only used when Prompt & Collect Digits is set to Yes.	3
Failover Destination	Where the call routes if the user does not enter digits	None
Available Group Selections	Groups that can be chosen to use the Group method of Routing Ops	All Unselected Groups
Selected Groups	List of Groups that have been added to this Routing Op	None

Configuring Expressions: Match List Method

Field	Function	Default
Input Type	Caller ID: Route by the CID of the caller Dialed Number: Route by the DID dialed by the caller Collected Digits: Route by digits entered by the caller after connecting to the PBX	Caller ID
Use the Right Most	Total number of digits to use in the input parameter	10
Starting in position X	Starting from the left, how many digits to skip before reading to compare to parameter	0
Collect X Digits	How many digits to read moving right from the starting positition	10
Match Input Parameter	This is where you will enter the values that will be compared, resulting in a True or False	None
If the input parameter X matches a member of the list	This can be set to Matches or Does Not Match, depending on the functionality you want to result in a re-routing of the call.	Matches
Route to Destination	Set this to any destination on the PBX, and will trigger when the input data matches the parameters configured.	None

Configuring Expressions: Table Lookup Method

• Once the Routing Op has been saved as Table Lookup method, a button reading Manage Data will appear.  Click this to access the advanced methods of defining expressions available to the Table Lookup operation.

• Clicking Manage Data will bring up options to manually enter data into a new table, or to load a CSV file with the parameters you wish to use.

• Selecting Manual method will bring you to the next page, allowing you to define if the table created should have 1, 2, or 3 columns.

• Which takes you to the next page, allowing you to define the expressions in each column, as well as the ability to create or remove rows, allowing you to add or delete parameters.

• If you choose to load a CSV file, the page above will display.  With this you get to define how many columns the table will have, where to import each CSV column into the Routing Ops table, and then allowing you to browse to and load the file.

• Regardless of whether the manual or CSV method were used to create the table, the same page will display when you back out to the Edit page for the Routing Op and click Expressions.

Field	Function	Default
Get value in Column X	Define what colume to refer to for this comparison.  Values can be 1, 2, or 3	1
as an X value	Are we comparing a Text value or a Number	Text
Use the Right Most X digits	Total number of digits to use in the input parameter	10
Starting in position X	Starting from the left, how many digits to skip before reading to compare to parameter	0
Collect X Digits	How many digits to read moving right from the starting positition	10
Get value in column X as an Y value for parameter 2	Define what column to read, and what type of data it will be reading for comparison of parameter 2.  Column can be 1, 2, or 3. Type can be Number or Text.	2, Text
Get value in column X as an Y value for parameter 3	Define what column to read, and what type of data it will be reading for comparison of parameter 3.  Column can be 1, 2, or 3. Type can be Number or Text.	3, Text
If the Caller Input [Dropdown] a value in the Lookup Column And	Is equal to OR Is not equal to are the options here, defining if you take action when there is or is not a match.	Is Equal to
Table parameter two [Dropdown] ________	Is equal to OR Is not equal to are the options here, defining if you take action when there is or is not a match.  The text field is where you enter the expression to compare to.	Is Equal to
AND/OR	Choose either And OR Or.  And means both must match, or means either can match.	AND
Table parameter three [DropDown] ________	Is equal to OR Is not equal to are the options for the dropdown, defining if you take action when there is or is not a match.  The text field is where you enter the expression to compare to.
Route To Destination	Where to send the call if all aprameter comparisons match	None