Difference between revisions of "Router Compatibility"
| Line 117: | Line 117: | ||
| nowrap="nowrap" style="width:131px;height:48px;" | | | nowrap="nowrap" style="width:131px;height:48px;" | | ||
| − | + | ||
| style="width:355px;height:48px;" | | | style="width:355px;height:48px;" | | ||
Registration issues and no way to disable SIP ALG. | Registration issues and no way to disable SIP ALG. | ||
| Line 1,281: | Line 1,281: | ||
| style="width:355px;height:48px;" | | | style="width:355px;height:48px;" | | ||
| − | + | Mikrotik SIP ALG should be disabled. Mikrotik has a forum on how to do this for their routers. | |
|- | |- | ||
Revision as of 13:28, 15 March 2018
This list of routers have been found to be compatible with SIP PBXs. Entries highlighted in green have been reported by our dealers to meet or exceed their needs. The list is by no means complete but it is provided for reference.
Here is a link to a more current list of routers tested for SIP:
http://support.vocalocity.com/kb/router-compatibility-guide-and-recommended-equipment-list/
| Manufacturer | Model |
Description |
Price Range | Configuration | Version Reviewed |
| D-Link | EBR2310 | 4-Port Wired Router | $30 - $50 | Disable SPI and SIP ALG | 2.01 Hardware Version: B1 |
| D-Link | WBR2310 | 4-Port Router with Wireless-G | $30 - $50 | No special configuration | 2.03 Hardware Version: B1 |
| Linksys | RV042 | 4-Port VPN Wired Router | $180-$200 | No special configuration | 1.3.12.6 and 1.3.12.19 |
| Linksys | WRP400 | 4-Port Router with Wireless-G | $100-$140 | No special configuration | 1.00.06 |
| Netgear | WNR3500 L | 4-Port Router with Wireless N | $80-130 | Disable SPI and SIP ALG | V1.2.2.34NA HW: V1 |
| Netgear | WGR614 (Hardware Version V8-V9 -V10) | 4-Port Router with Wireless-G | $30 - $50 | Disable SPI and SIP ALG | 1.1.24 HW: v8 and 1.2.24 HW: V9 |
| Netgear | WNDR3300 | 4-Port Router with Wireless N | $80-120 | Disable SPI and SIP ALG | V1.0.45 HW: V1 |
| Netgear | WNDR3700 | 4-Port Router with Wireless N | $150-170 | Disable SPI (DoS Protection) and SIP ALG | V1.0.4.55NA HW: V1 |
| Netgear | DG834G | DSL Modem Router Combination (For DSL ONLY) | $60-$90 | Disable SPI (DoS Protection) and SIP ALG | 5.03.14 and 5.03.16 |
| Linksys | wrt54gL | 4-Port Router with Wireless | $60-$90 | Load DD-WRT firmware (File:WRT54GL DDWRT Install Guide.doc), Standard Build |
Only one available currently |
A more extensive Router Compatability list, but certainly not complete. Always update the firmware to the latest version if you experience any VOIP issues with any router/firewall.
|
2Wire |
||
|
Model |
Compatibility |
Notes |
|
PLC 3801HGV, PLC 5031NV, PLC 5168NV-110 |
|
Registration issues and no way to disable SIP ALG. |
|
3G/4G/LTE Modems |
||
|
Model |
Compatibility |
Notes |
|
All hot spot type modems |
|
Latency can affect audio quality. |
|
ActionTec |
||
|
Model |
Compatibility |
Notes |
|
F2300, GT704, PK5000 |
|
Audio issues. Recommend DMZ mode and use a different router. |
|
C1000A, PK5000(A), Verizon 1000 and 2000, GT784WN/V |
|
Potential for one-way audio. No way to disable the ALG configuration. |
|
Q2000, Frontier F2250, MI424 (hardware E or higher) |
|
Disable SIP ALG. Make sure software ALG firewall is OFF. If using Polycom phones, suggest adding 8.8.8.8 and 8.8.4.4 as DNS custom servers (i.e. Google DNS servers). For MI424 you may need to add QoS rules for the VoIP provider's PBX. Ask provider for details. |
|
1000, 2000 (Verizon) |
|
Make sure ALG disabled. Firewall must be LOW or OFF. Disable DNS proxy/relay. May still have issues. Recommend replacing. |
|
GT784WN, GT784WNV (Verizon) |
|
No way to disable ALG. Set firewall to OFF or likely will have fax issues. Recommend replacing. |
|
Adtran |
||
|
Model |
Compatibility |
Notes |
|
NetVanta 3200, NetVanta 3448 |
|
Disable SIP ALG. Add Google DNS servers (8.8.8.8 and 8.8.4.4) if using Polycom phones. Disable DNS relay/proxy. Increase UDP time out values (e.g. to 600 seconds). Some providers offer configuration details. |
|
Ambit/Ubee |
||
|
Model |
Compatibility |
Notes |
|
U10C037 |
|
Replace. Even in DMZ or bridge mode there are issues with this device. |
|
Amped |
||
|
Model |
Compatibility |
Notes |
|
All models |
|
Audio and registration issues. Replace. |
|
Apple |
||
|
Model |
Compatibility |
Notes |
|
A1354, A1408, A1521 |
|
Known issues. Do not use Wireless G version. |
|
Airport Time Capsule |
|
Issues. Replace device. |
|
Arris |
||
|
Model |
Compatibility |
Notes |
|
DG860, DG1670A |
|
No way to disable SIP ALG. Dropped calls. DHCP server has multiple issues. Replace or DMZ to better router. Issues with bridge mode too. |
|
TG852, TG862, DG860A, DG1670A |
|
Recommend changing firewall setting to LOW to improve stability for audio. New version only as old versions you cannot disable the ALG configuration. Do not recommend this device if you are using Polycom phones due to inability to change DNS servers. |
|
Asus |
||
|
Model |
Compatibility |
Notes |
|
RT-AC68R, RT-AC68U, RT-AC66R, RT-AC66U, RT-N66R, RT-N66U, RT-AC56U, RT-N56R, RT-N56U, RT-N14U, RT-N16, RT-N16R, RT-N12B1, RT-N10+ |
|
Certain firmware version can cause problems with dropping audio. Disable ALG (Telnet required for this on some firmware versions i.e. enable Telnet and then nvram set nf_sip=0 and then nvram commit and power cycle). Check Advanced Settings > WAN > NAT Passthrough > SIP Passthrough and verify disabled. |
|
Aztech |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Known issues but can usually work. Disable ALG and if still issues upgrade firmware. |
|
Barracuda |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Disable ALG (Firewall > Firewall Rules > Custom FirewallAccess and then disable SIP rules). Also worth increasing UDP timeout period (e.g. 600 seconds) as otherwise this could cause NAT problems. |
|
Beetel |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Enable SIP ALG for this device but expect audio issues. Best to DMZ to a compatible router. |
|
Belkin |
||
|
Model |
Compatibility |
Notes |
|
F5D, F6D, F7D, FDS, F9K Series (and others) |
|
Registration issues and intermittent audio. Also no way to disable ALG. Replace. |
|
Bell |
||
|
Model |
Compatibility |
Notes |
|
Branded models |
|
Audio issues. Replace or DMZ to compatible router. |
|
BSNL |
||
|
Model |
Compatibility |
Notes |
|
Branded models |
|
Audio issues. Replace or DMZ to compatible router. |
|
Buffalo |
||
|
Model |
Compatibility |
Notes |
|
N300 DD-WRT, N450 DD-WRT, N600 DD-WRT, AC 1750, WZR-1750DHPD. Also any other DD-WRT version |
|
DD-WRT firmware is robust and has many features. Should work fine with VoIP. |
|
Non DD-WRT stock models and DD-WRT NXT (stripped down) |
|
Audio and registration issues. Replace. |
|
Calyptix |
||
|
Model |
Compatibility |
Notes |
|
All |
|
DMZ mode. Need ISP help to do this. |
|
CenturyLink |
||
|
Model |
Compatibility |
Notes |
|
C1000A, PK5000, PK5000A |
|
No way to disable the ALG configuration, which causes audio problems and sometimes registration failures. Try disabling the software firewall as it causes registration issues for phones (unless phones are UDP port 5060). DMZ mode or replace. |
|
CheckPoint |
||
|
Model |
Compatibility |
Notes |
|
UTM Firewalls |
|
Disable ALG (SIP Protocol Handler > set to Disabled). Increase length of UDP timeout. |
|
Clear |
||
|
Model |
Compatibility |
Notes |
|
Branded models |
|
Disable firewall and place into DMZ mode to a different router. |
|
Cisco |
||
|
Model |
Compatibility |
Notes |
|
DDR220, Valet (all models), WRV210 |
|
Audio and registration problems. Replace with better router. |
|
DPC3825 |
|
Replace. Even in DMZ/bridge mode issues remain. |
|
DPC3939/B, DPC3941B/T, DPQ3925C, DDR2200 |
|
Change firewall to LOW setting. May still be issues with SIP NAT ALG (enabled by default). Try enabling NAT. For DDR2200 Cisco SIP ALG is disabled through a hidden page ([your ip address]/algcfg.html then disable). |
|
860, 861, 880, 881, 890, 891 |
|
Some optimization may be necessary. Providers may have configuration files for these. |
|
Comtrend |
||
|
Model |
Compatibility |
Notes |
|
NexusLink |
|
Tends to be hit or miss. Disable ALG, but sometimes still need to place in DMZ mode or replace. |
|
CT-5361T, CT-5611T |
|
Disable ALG (Advanced Setup > NAT > ALG > Uncheck SIP Enabled). |
|
Cradlepoint |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Replace. Issues observed even in DMZ or bridge mode. |
|
D-Link |
||
|
Model |
Compatibility |
Notes |
|
DSL-2730U, 2750U |
|
Audio issues. Recommend replacing. |
|
DIR-600, DIR-615 |
|
3.X firmware NAT ALG must be enabled in order to register phone but over time it causes registration problems. |
|
DIR-601, DIR-632 |
|
One way audio. Replace. |
|
DIR-628, DIR-825, DIR-835 |
|
Current firmware has issues for VoIP. Replace or try new version when it gets released. |
|
DIR-655 Rev B or Newer |
|
Some registration issues reported. |
|
DIR-655 Rev A , EBR-2310, WBR-2310 RevA |
|
Disable SIPALG and SPI firewall. DIR series in general is hit or miss based on version you are using. Recommend uploading latest and greatest firmware and try to disable ALG in order to maximize chance of success. |
|
Draytek |
||
|
Model |
Compatibility |
Notes |
|
All firewalls |
|
Disable DoS protection and ALG (may need to be done over Telnet using sys sip_alg 0 and then sys commit and sys reboot). |
|
Dynex |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Replace. |
|
Edgewater |
||
|
Model |
Compatibility |
Notes |
|
200AE, 250AE, 4550-15, 4700, 4750 |
|
Disable SIPALG and QoS may be needed. Some providers offer specific configurations for these routers. |
|
Edgemarc |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Disable ALG and also disable option 66. |
|
EdiMAX |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Disable ALG and SPI firewall. Some people have had success others needed to replace device. |
|
Engenius |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Disable ALG and SPI firewall. Some people have had success others needed to replace device. |
|
Frontier/Actiontec |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Disable ALG and Quality of Service (QoS), then DMZ to better router. |
|
Hitron |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Audio problems. DMZ mode or replace. |
|
Huawei |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Some success when disabling ALG which likely will need help from Internet provider. If issues DMZ or replace. |
|
Juniper |
||
|
Model |
Compatibility |
Notes |
|
SSG5 |
|
SALG enabled by default. Can cause 1-way audio and call drops. Disable ALG (Security > ALG). Create access rules if necessary. |
|
Linksys |
||
|
Model |
Compatibility |
Notes |
|
BEFS Series, BEFSR Series, E3000 |
|
Replace. |
|
E900, E1200, E2500, E3200 v1, E3500, E4200 v1 and above, EA4500 v1, EA6900 v1, WRT610N |
|
Disable Linksys SIP ALG and SPI firewall. |
|
RV016, RV042, RV082, RV110W, RV120W, RV160, RV0162, RV180, RV180W, RV215W, RV320, RV325 |
|
Best to disable load balancing and also SIP helper. Most have ALG enabled by default, which is usually fine for Cisco but worth noting that not across all versions of firmware. Recommend increasing MTU size to 1500. Increase UDP port timeout to 600 seconds. |
|
RVS4000 |
|
One way audio after doing attended transfers. Recommend replacing. |
|
WRT100, WRT110N, WRT120N, WRT150N, WRT160N, WRT300N, WRT320N, WRT350N, WRT54G, WRT55AG, WRV200, WRV210, WRV54G, WRT610, LRT224 |
|
Registration issues and audio problems. Appears to be no way to disable ALG. Recommend replacing. If you can replace Linksys firmware with DD-WRT firmware you will have a good chance of success for VoIP calls. Not possible for all variants though WRT54 is popular and has options. |
|
MediaLink |
||
|
Model |
Compatibility |
Notes |
|
MWN-WAPR150N |
|
Registration and audio problems. Replace. |
|
Meraki |
||
|
Model |
Compatibility |
Notes |
|
MX64, MX84 |
|
Some providers offer configuration files to optimize settings for VoIP. |
|
Mikrotik |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Mikrotik SIP ALG should be disabled. Mikrotik has a forum on how to do this for their routers. |
|
Motorola |
||
|
Model |
Compatibility |
Notes |
|
NVG510, NVG589, 3360, 2210 |
|
No way to disable ALG (contact provider if need this as may be way to do it using Telnet but depends on ISP i.e. set ip alg sip-enable off). This causes calls to drop. Passthrough required to compatible router or replace. |
|
NVG595 |
|
Turn off SIP ALG (Firewall > Firewall Advanced). Add google DNS servers (8.8.8.8 and 8.8.4.4) if using Polycom. May need to get ISP to add this for you. |
|
SBG6580 |
|
Disable ALG and ensure firmware is 3.3 or newer. Still some reports of issues but newer firmware should help. |
|
Netopia 2000, Netopia 3000 |
|
Disable ALG. Disable DNS proxy if using Polycom phones. Make sure firewall set to ClearSailing or lower, otherwise expect registration issues. Can use PuTTY to access SIP settings (e.g. set ip sip-passthrough off). |
|
Netgear |
||
|
Model |
Compatibility |
Notes |
|
R6100, R6200, R6220, R6250, R6400 |
|
Latest firmware needed plus disable ALG and DoS (Denial of Service) settings. |
|
R6300 v1, WGR614 v8 and above, WNDR3400, WNDR3700 v1/v3/v4, WNR3500L v1 and above, WNDR3300, WNR1000 v2 and above, WNR2000 v2 and above, DG834G, AC1750, FVS336G |
|
Disable Netgear SIP ALG and DoS settings. Some providers offer configuration information. May need latest firmware to access ALG. |
|
R7000 Nighthawk, R8500 Nighthawk X8 |
|
Disable SIP ALG and DoS settings. Also do not setup QoS. May still have some audio related issues or registration failures. |
|
AC1450, RP114, FVS Series, JNR Series, JWNR Series, R4500, R6050, R6700, R6900, R7000, R7500 Nighthawk X4, R7900 Nighthawk X6, SRX/UTM (all models), WGT624, WNDR3400, WNDR3700 v2, WNDR3800, WNDR4000, WNDR4300, WNDR4500, WNDR4700, WNDR4720, WNR1000 v1, WNR2000 v1, WNR2500, WNR3500, WNR834B, WPN824, MR814, FVS318, FVG318 |
|
Dropped calls and poor audio. Try updating firmware to see if ALG setting becomes available. Otherwise, replace. |
|
7550 |
|
Disable ALG and DoS. DMZ mode if still issues. |
|
C3000, C3700, C6300, C7000, WCOM, CG814WG/T, CGD24G |
|
Audio problems and also dropped calls. Replace. |
|
CG3000 (Comcast!) |
|
Problems even when in DMZ or bridged mode. Note that Comcast often brands this device and gives you no access to SIP ALG (some forums suggest Comcast SIP ALG can be disabled if you call them). Many problems reported with this device. Recommend replacing. Get a Motorola Surfboard modem (e.g. SB6141) and use your own router. Can then remove the Comcast rental fee for the modem. Will likely pay for itself within 6 months. I can personally attest to issues with CG3000 and spent way too many hours troubleshooting. |
|
CGD24G |
|
Issues. Recommend pass-through to compatible router. |
|
Netopia |
||
|
Model |
Compatibility |
Notes |
|
3000 |
|
Disable ALG. |
|
Optimum |
||
|
Model |
Compatibility |
Notes |
|
Cloud devices |
|
DMZ mode and likely need ISP help to do this. |
|
Pace |
||
|
Model |
Compatibility |
Notes |
|
PLC 3801HGV, PLC 5031NV, PLC 5168NV-110 |
|
Disable attack detection and put into pass-through mode to better router. Consider adding custom service to all SIP traffic through on ports 5060 through 5080. Many models give no access to SIP ALG so unable to disable. Some phones will have registration issues (e.g. Polycom) due to the inability to add DNS servers. Bridge mode is not effective so even doing this and using another router will not guarantee success. Also recommend editing UDP session timeout to something higher (e.g. 600 seconds). |
|
Quantum |
||
|
Model |
Compatibility |
Notes |
|
Q1100, G1100 |
|
Dropped calls. Also Busy Lamp Field (BLF) issues. Recommend DMZ to other router. No way to disable ALG. |
|
Rosewill |
||
|
Model |
Compatibility |
Notes |
|
RNX-AC750RT |
|
Disable ALG. Some providers have configuration files for this router. |
|
Satellite Equipment |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Latencies are very high for satellite service since they are in geo-sync orbit 22,000 miles up. VoIP does not work well with satellite Internet service. |
|
Siemens |
||
|
Model |
Compatibility |
Notes |
|
SpeedStream 4200 |
|
Disable ALG. |
|
SpeedStream 5100 |
|
Audio problems. DMZ or bridge to better router. |
|
Sagecom |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Drops calls and audio artifacts. Replace or DMZ to another router. |
|
Samsung |
||
|
Model |
Compatibility |
Notes |
|
Ubigate |
|
Disable ALG but need Internet provider assistance to do this. |
|
SMC |
||
|
Model |
Compatibility |
Notes |
|
SMC 3100, SMC D3GNV |
|
Audio problems. DMZ to better router. |
|
SMC 8014, SMC D3G-CCR |
|
Typically can be made to work. Disable Smart packet detection (SPI firewall). |
|
Sonicwall |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Generally, you will have good success with Sonicwall, especially the newer models (SonicOS Enhanced). Upgrade to latest, stable firmware. Disable ALG (called SIP Transformations). Enable consistent NAT. Create access rules if necessary. |
|
Technicolor |
||
|
Model |
Compatibility |
Notes |
|
TC8305C, TC8715 |
|
Firewall should be changed to the low setting which may help. No way to disable ALG. Best to replace. |
|
Thompson |
||
|
Model |
Compatibility |
Notes |
|
DWG-855, TG585 v8, TG587n v2 and above, TG585 v8 |
|
Audio problems. Replace or DMZ to a different router. |
|
TP Link |
||
|
Model |
Compatibility |
Notes |
|
Most models |
|
Replace. Audio problems. |
|
Archer C3200, Archer C9 AC1900, SafeStream TL-600VPN, TL-WR1043ND v2 |
|
Disable ALG, if applicable. Some providers have configuration files on offer for these routers. Disable DNS Proxy/Relay. |
|
TrendNet |
||
|
Model |
Compatibility |
Notes |
|
TEW-639GR, TEW-711BR, TEW-731BR, TW100 |
|
Replace. Audio problems due to ALG. No way to disable. |
|
Ubee |
||
|
Model |
Compatibility |
Notes |
|
DDW3610, DBW3611 |
|
Depends on firmware version. Many do not allow you to turn SIP ALG on or off. |
|
Ubiquiti |
||
|
Model |
Compatibility |
Notes |
|
Edgemax Edgerouter, Air router HP |
|
Must disable ALG (Network tab then uncheck NAT protocol). For Edgerouter need to use the CLI (configure then set system conntrack modules sip disable and then save and then exit. |
|
Vizio |
||
|
Model |
Compatibility |
Notes |
|
XWR100 |
|
Unstable software firewall. Try newer firmware. May need to replace. |
|
Watchguard |
||
|
Model |
Compatibility |
Notes |
|
XTM Series |
|
No issues if using port 5060 for SIP control traffic. Increase UDP timeout to 600 seconds. |
|
X-edge E series |
|
No issues if using port 5060 for SIP control traffic. ALG disabled by default. Increase UDP timeout to 600 seconds. |
|
Westell |
||
|
Model |
Compatibility |
Notes |
|
6100, 7500, 9100 (Verizon) |
|
Disable ALG (Advanced > ALG > uncheck SIP). Disable software firewall but still issues. The keep alive packets would have to be around 5 seconds for this to work and keep pin hole open. However it does not maintain this after re-boot. Suggest replacing. |
|
Western Digital |
||
|
Model |
Compatibility |
Notes |
|
MyNet N600 |
|
Disable SIP ALG. |
|
Zhone |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Audio problems. Replace or DMZ to a different router. |
|
ZTE |
||
|
Model |
Compatibility |
Notes |
|
All |
|
Audio problems and dropped calls. Replace with compatible router or DMZ to one. |
|
ZyXEL |
||
|
Model |
Compatibility |
Notes |
|
P-660HW, P792H v2, PK5001Z, ZyWall USG series |
|
Disable SIP ALG for Zyxel. Disable software firewall. |