Forwarding Gateway

From IPitomy Wiki
Revision as of 15:02, 19 February 2016 by Mike Lunn (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Changing Forwarding Settings Remotely
1. Select < Menus > Under Destinations
2. Select Service from the drop down menu in the menu using a specific single digit menu programming number or symbol to select the detination type.
3. Select Forwarding Gateway from the drop down menu.
4. Save and apply changes.

Now when a caller wants to call in remotely to change their forwarding parameters; enable/disable/forwarding number, they will be prompted through the process after selecting the appropriate single digt that has been assigned - in this case it is the Asterisk/Star symbol.

NOTE: To forward the original caller's callerID along with the call itself, go under Call Routing=>Outgoing, choose the appropriate route that matches the forwarding setting (10 digit, 11 digit, etc), and enable Force Use PSTN CID.


File:Fgateway1.jpg