IPPBX IMM Web Server Configuration

From IPitomy Wiki
Revision as of 14:09, 7 September 2012 by Drew Harrell (talk | contribs)
Jump to navigation Jump to search

__NO_TITLE__

Web Server Configuration

This feature allows you to define which IPs and/or domains can access the web server, as well as restart the Web Server. In order for changes to this list to take effect, you must Restart the Web Server.

The parameter for the IP PBX Web Server is pre-configured per the manufacturer’s specifications. We recommend that you do not change this configuration.


Figure 18Web Server Configuration Page


Feature
Description
Restart Web Server This feature allows you to restart the web server so that changes made that impact server components can be applied.

Note: Restarting the server will not interrupt phone service. A reboot of the PBX system will also apply changes made to other attributes.

Allow Access From Defines the networks and/or domains that are allowed to access the PBX. The “Allow” format may be:
  • Domain name
  • Full IP address
  • Partial IP address
  • Network / netmask pair
  • Network / CIDR specification


Delete Selected Items This button allows you to delete multiple services at a time.
Load Factory Defaults This button will set the PBX back to the default Web Server settings.



Add a New Item This section is where you would add new rules for accessing the Web Server

IMPORTANT: Changes to the Web Server Access List are preconfigured. They are database independent so custom changes do not migrate from one box to another via a database backup file.

Please contact IPitomy’s Technical Support Group if you think you need to modify these settings. Email via support@ipitomy.com or phone at 941-306-2200 option 2. You can also visit our FAQ page at faq.ipitomy.com.

Add New Permission

STEPS:

  1. Navigate to System Access Control
  2. Click on the Web Server button located at the top of the page. The Web Server Configuration page appears.
  3. In the Add a New Item section, enter the network or domain you want to allow to access the PBX web server
  4. Click the ADD button.
  5. The new permission rule will be displayed under Allow Access From window above
  6. Click on the Restart Web Server button.
  7. Click OK when prompted to confirm you wish to restart the Web Server
  1. A “Please Standby” message appears. Once the reboot process is completed you will be returned to the Web Server Configuration page.

Load Factory Default

This feature allows you to restore the manufacturer’s factory default settings. It will restore the settings to the factory recommended defaults.


STEPS:

  1. From the Web Server page, click Load Factory Default button. This will return or restores the Allow Access From list back to the manufacturer’s default setting.
  2. Once the changes applied, you will need to restart the web server. Please refer to the Restart Web Server topic of this user guide for steps on how to restart the server.
  3. Click on the Restart Web Server button.
  4. Click OK when prompted to confirm you wish to restart the Web Server
  1. A “Please Standby” message appears. Once the reboot process is completed you will be returned to the Web Server Configuration page.
Retrieved from "http://wiki.ipitomy.com/index.php?title=IPPBX_IMM_Web_Server_Configuration&oldid=341"