NexVortex

Below is the last known working configuration we had with NexVortex. Their portal can be found at http://www.nexvortex.com. Be sure to verify the host, username, secret, and call limit with the provider before starting configuration to ensure the process runs as smoothly as possible. This is a basic configuration to get the trunks working, there are many optional fields that you may want to configure as well depending on the specific application. If you have a static IP, you won't need to register with a user/pass, just provide your public IP to nexvortex and they will authenticate from that. If you need to use a host name, provide nexvortex with that domain and they can authenticate that way without registration.

• With NexVortex, you will need to enable DNSSRV Lookup, found under PBX Setup=SIP=Advanced