IS710 Door Box

IPitomy Door Box Quick Setup Guide

The Ipitomy IS710 Door box comes by Default configured to a Static IP of

192.168.1.153

On First login make sure Language is set to English using the drop down on the left.

It is reccomended to connect to this IP address and then step one would be to configure for DHCP the network Settings.

Step Two Configure Extension

Simply Create an Extension for the Doorbox in the PBX. Then using Auto- Discovery find the device by scanning the network and configure in the normal Auto Discovery Method.

Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.

The operation is defined as, User presses Center call button on Door box, Unit Hot dials the Extension or group defined under Hotdial, and the answering party dials 00 which activates the door open current.