Difference between revisions of "Console Changing IP Address"
Jump to navigation
Jump to search
Drew Harrell (talk | contribs) (Created page with "=== Changing the IP Address === The Network Console allows you to view and change settings without requiring an external web browser or any network connection. ====STEPS====...") |
Paul Falanga (talk | contribs) |
||
| Line 1: | Line 1: | ||
=== Changing the IP Address === | === Changing the IP Address === | ||
| − | The Network Console allows you to view and change settings without requiring an external web browser or any network connection. | + | The Network Console (keyboard and monitor - plugged directly into the PBX) allows you to view and change settings without requiring an external web browser or any network connection. |
| − | ====STEPS==== | + | ==== STEPS ==== |
| − | # Plug a keyboard and monitor into the IP PBX. | + | #Plug a keyboard and monitor into the IP PBX. |
| − | # From this keyboard, press CTRL-ALT-F7 | + | #From this keyboard, press CTRL-ALT-F7 |
| − | # Follow the instructions displayed on the page to configure the IPs for the PBX. | + | #Follow the instructions displayed on the page to configure the IPs for the PBX. |
| + | <br/>The options used are as follows. | ||
| − | + | <br/>'''1''': Network Type Static or DHCP | |
| − | |||
| − | |||
| − | '''1''': Network Type Static or DHCP | ||
'''2''': IP address | '''2''': IP address | ||
Latest revision as of 18:23, 24 August 2012
Changing the IP Address
The Network Console (keyboard and monitor - plugged directly into the PBX) allows you to view and change settings without requiring an external web browser or any network connection.
STEPS
- Plug a keyboard and monitor into the IP PBX.
- From this keyboard, press CTRL-ALT-F7
- Follow the instructions displayed on the page to configure the IPs for the PBX.
The options used are as follows.
1: Network Type Static or DHCP
2: IP address
3: Subnet Mask
4: Default Gateway
5: Static DNS
6: Static DNS 2
7: Static DNS 3
R: Refresh View
D: Default Settings
S: Save & Update
Once all values have been configured to match the install network, choose S to Save & Update.
Note: For further details on using the Net Console, please refer to Appendix 6.