Difference between revisions of "IP PBX Manual Appendix 6 Router Configuration"

From IPitomy Wiki
Jump to navigation Jump to search
(No difference)

Revision as of 19:43, 7 September 2012




Logo on white background (small).gif
support@ipitomy.com | 941.306.2200 (Opt 2 for Support)
You are viewing the IPitomy IP PBX Manual, Table of Contents.


Appendix 6: Router Configuration

The sample setup instructions below use a Linksys router and are meant for demonstration purposes only.

STEPS:

  1. Log into the router using the router’s IP address (e.g., 192.168.1.1).
  2. Open a Web browser. Enter the IP address of the router (e.g., 192.168.1.1) and press Enter.
  3. Login to the router using the Username and Password. For help refer to router documentation.
  4. Navigate to Port Forwarding. For help refer to router documentation. Open ports 5060 to 5060 on the IP address for the system being installed (e.g., 192.168.1.249) for both UDP and TCP (Name = SIP).
  5. Open ports 10000 to 20000 on the IP address for the system being installed for both UDP and TCP (Name = RTP).
  6. Open ports 4569 to 4569 on the IP address for the system being installed for both UDP and TCP (Name = IAX2).
  7. Click Apply Changes to commit the changes to the database.