IP PBX Manual PBXSetup General

From IPitomy Wiki
(Difference between revisions)
Jump to: navigation, search
(Admin Settings Section)
m
 
(34 intermediate revisions by 3 users not shown)
Line 6: Line 6:
 
== General System Setup ==
 
== General System Setup ==
 
While not visited often, the General settings page pertains to some core PBX components, like administrator Username and Password, Time Settings, System Operator, Mailbox Exit Destination, Directory Type, '''Autoprovisioning''', and Security Settings.
 
While not visited often, the General settings page pertains to some core PBX components, like administrator Username and Password, Time Settings, System Operator, Mailbox Exit Destination, Directory Type, '''Autoprovisioning''', and Security Settings.
 
+
[[File:adminsettingssection.png|center]]
 
=== Admin Settings Section ===
 
=== Admin Settings Section ===
  
Line 31: Line 31:
 
'''STEPS:'''
 
'''STEPS:'''
  
#From the '''PBX Setup''''''General System Setup '''page, locate the '''Admin Settings '''section.
+
#From the '''PBX Setup'''->'''General System Setup '''page, locate the '''Admin Settings '''section.
 
#Enter the administrative information required.
 
#Enter the administrative information required.
#Click the button to save the changes.
+
#Click the [[File:savechanges.png]] button to save the changes.
 
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
 
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
 
=== General Settings Section ===
 
=== General Settings Section ===
 
+
[[File:generalsettingssection.png]]
{| style="border-spacing:0;"
+
{| style="border-spacing:0"
| style="background-color:#b8cce4;border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Sections/Fields'''</center>
+
| style="background-color:#b8cce4;border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Description'''</center>
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== System Operator =====
+
| style="background-color:#b8cce4; border-top:0.0069in solid #0000ff; border-bottom:0.0069in solid #0000ff; border-left:0.0069in solid #0000ff; border-right:none; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | <center>'''Sections/Fields'''</center>
 
+
| style="background-color:#b8cce4; border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | <center>'''Description'''</center>
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the default destination that callers will go to when pressing '''‘0’''' while in a voicemail box, if Allow Operator is enabled on the voicemail box. Additionally, if an extension dials zero, this will be where they are directed.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Mailbox Exit Destination =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''System Operator<br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the default destination that callers will go to when pressing '''‘0’''' while in a voicemail box, if Allow Operator is enabled on the voicemail box. Additionally, if an extension dials zero, this will be where they are directed.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the default destination for a caller if they press '''‘#‘'''after leaving a voicemail message.  
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Directory Type =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Mailbox Exit Destination <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the default destination for a caller if they press '''‘#‘'''after leaving a voicemail message.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This determines if the name directory search will use the first or last name.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Cascading Voicemail Notification Interval =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''&nbsp;Directory Type <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This determines if the name directory search will use the first or last name.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the frequency with which the PBX will check and send out cascading message notifications.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Default Class of Service =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Cascading Voicemail Notification Interval<br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the frequency with which the PBX will check and send out cascading message notifications.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Defines what COS each newly created extension will use unless it is changed.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Branch Class of Service =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Default Class of Service <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Defines what COS each newly created extension will use unless it is changed.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the default COS for a Branch Office using Branch Office Trunking.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Internal Distinctive Ring =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Branch Class of Service <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the default COS for a Branch Office using Branch Office Trunking.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the type of ring that will be used for internal calls.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== 5xi Paging Fix =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''&nbsp;Internal Distinctive Ring <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the type of ring that will be used for internal calls.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Enabled (set to YES) this parameter only if IPitomy’s technical support personnel advises.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Park Timeout =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''5xi Paging Fix<br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Enabled (set to YES) this parameter only if IPitomy’s technical support personnel advises.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is how long the PBX will wait before timing out to an extension that has a parked call, which if unanswered will failover to the System Operator. Default value is '''180''' seconds.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Feature Digit Timeout =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Park Timeout <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is how long the PBX will wait before timing out to an extension that has a parked call, which if unanswered will failover to the System Operator. Default value is '''180''' seconds.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the timeout parameter for the feature code digit press attempts (in milliseconds). Default value is '''3000'''.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Transfer Digit Timeout =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Feature Digit Timeout <br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the timeout parameter for the feature code digit press attempts (in milliseconds). Default value is '''3000'''.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the timeout parameter for inter-digit timing on feature code based transfers. Default value is '''5'''.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Extension FAX Detect Timer =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Transfer Digit Timeout<br/>'''
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is the timeout parameter for inter-digit timing on feature code based transfers. Default value is '''5'''.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is how long, in seconds, the PBX will detect to see if a call ringing to an extension is a fax. The setting is enabled under extension settings. Default value is '''4.5'''.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Auto-Provisioning =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in;  border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255);  padding: 0in 0.075in;  text-align: center" | '''Extension FAX Detect Timer<br/>'''
 +
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This is how long, in seconds, the PBX will detect to see if a call ringing to an extension is a fax. The setting is enabled under extension settings. Default value is '''4.5'''.
 +
|-
 +
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid;  border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255);  padding: 0in 0.075in;  text-align: center" | '''Auto-Provisioning<br/>'''
 +
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | While auto-provisioning is Running, users may use the phone-based auto-provisioning mechanism in IPitomy phones to assign or create extensions. Click on to start, and Off to stop the service. This does not require saving or applying changes.
 +
|}
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| While auto-provisioning is Running, users may use the phone-based auto-provisioning mechanism in IPitomy phones to assign or create extensions. Click on to start, and Off to stop the service. This does not require saving or applying changes.
+
==== Edit General PBX Settings ====
  
|}
 
==== Edit General PBX Settings ====
 
 
'''STEPS:'''
 
'''STEPS:'''
  
# From the '''PBX Setup'''''' General System Setup '''page, locate the '''General Settings '''section.
+
#From the '''PBX Setup'''->'''General System Setup '''page, locate the '''General Settings '''section.
# Enter the information required for the '''PBX Security''' settings
+
#Enter the information required for the '''PBX Security''' settings
# Click the button to save the changes.
+
#Click the [[File:savechanges.png]] button to save the changes.
# Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
+
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
 
=== Security Settings Section ===
 
=== Security Settings Section ===
 
==== Log Watch/Ban Service ====
 
==== Log Watch/Ban Service ====
This feature allows the PBX to monitor the SIP registration traffic and ban any IP address that makes 5 failed registration attempts. The IP address will be banned for either 5 days or until the service is restarted. Configuration settings allow you to ignore (not monitor) IP addresses that are communicating from the LocalNet, as well as allowing you to manually add addresses you want the system to ignore.  
+
 
 +
This feature allows the PBX to monitor the SIP registration traffic and ban any IP address that makes 5 failed registration attempts. The IP address will be banned for either 3 days or until the service is restarted. Configuration settings allow you to ignore (not monitor) IP addresses that are communicating from the LocalNet, as well as allowing you to manually add addresses you want the system to ignore. If you set up an Admin Email Address under PBX Setup=>General and have Unified Messaging configured, the PBX will send you an email any time an IP address is banned via this feature. Follow this link to see what a [[Ban Email]] will look like.
 +
 
 +
<br/>[[File:Pbxsecurity.png|center|Pbxsecurity.png]]
  
 
==== Enable Log Watch/Ban Service ====
 
==== Enable Log Watch/Ban Service ====
 +
 
'''STEPS:'''
 
'''STEPS:'''
  
# From the '''PBX Setup'''''' General System Setup '''page, locate the '''Security Settings '''section.
+
#From the '''PBX Setup'''->'''General System Setup '''page, locate the '''Security Settings '''section.
# '''Enable''' the '''Log Watch Ban Service '''by setting the parameter to “'''Yes'''” on the drop-down list.
+
#'''Enable''' the '''Log Watch Ban Service '''by setting the parameter to “'''Yes'''” on the drop-down list.
# Click the button to save the changes.
+
#Click the [[File:savechanges.png]] button to save the changes.
# Scroll back to the Log Watch Ban Service panel and click the '''Reload''' button.
+
#Scroll back to the Log Watch Ban Service panel and click the '''Reload''' button.
  
 
==== Set Log Watch/Ban Service Parameters ====
 
==== Set Log Watch/Ban Service Parameters ====
Once you have enabled the Log Watch/Ban Services, you will be able to configure the parameters for the security settings.
 
  
The following table describes the parameters and descriptions (recommended settings) for the Log Watch and Ban feature.
+
Once you have enabled the Log Watch/Ban Services, you will be able to configure the parameters for the security settings. [[File:Seclogwatch.png|center|Seclogwatch.png]] The following table describes the parameters and descriptions (recommended settings) for the Log Watch and Ban feature.
  
  
{| style="border-spacing:0;"
 
| style="background-color:#b8cce4;border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Sections/Fields'''</center>
 
| style="background-color:#b8cce4;border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Description'''</center>
 
  
 +
{| style="border-spacing:0"
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Service is currently Running =====
+
| style="background-color:#b8cce4;  border-top:0.0069in solid #0000ff; border-bottom:0.0069in solid #0000ff; border-left:0.0069in solid #0000ff; border-right:none; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | <center>'''Sections/Fields'''</center>
 
+
| style="background-color:#b8cce4;  border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | <center>'''Description'''</center>
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This indicates the status of the service, either '''Running''' or '''Not Running'''.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Reload Button =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in;  border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255);  padding: 0in 0.075in; text-align: center" | '''Service is currently Running '''<br/>
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | This indicates the status of the service, either '''Running''' or '''Not Running'''.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Restarts the Ban service, clearing any existing banned IP addresses.
+
|-
 
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in;  border-style: solid none solid solid;  border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255);  padding: 0in 0.075in;  text-align: center" | '''Reload Button'''<br/>
 +
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Restarts the Ban service, clearing any existing banned IP addresses.
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Enable Log Watch & Ban Service =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''&nbsp;Enable Log Watch & Ban Service '''<br/>
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Set to Yes and the PBX will monitor failed SIP registration attempts. 5 failed attempts and the IP is blocked for:
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Set to Yes and the PBX will monitor failed SIP registration attempts. 5 failed attempts and the IP is blocked for:
+
*3days
 
+
*Until system reboot
* 5days
+
*Until Reload button is clicked
* Until system reboot
+
* Until Reload button is clicked
+
  
  
  
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Ignore IPs in SIP LocalNets =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''&nbsp;Ignore IPs in SIP LocalNets '''<br/>
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Set to '''Yes''' and the PBX will ignore failed SIP registration attempts from IPs from the LocalNets configured in the system. When set to '''No''', IP addresses from the LocalNets are ignored for failed attempts.
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Set to '''Yes''' and the PBX will ignore failed SIP registration attempts from IPs from the LocalNets configured in the system. When set to '''No''', IP addresses from the LocalNets are ignored for failed attempts.
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Ignoring Addresses =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in; border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255); padding: 0in 0.075in; text-align: center" | '''Ignoring Addresses'''<br/>
 
+
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Lists the addresses that were manually entered to be ignored in regards to failed SIP registration attempts
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Lists the addresses that were manually entered to be ignored in regards to failed SIP registration attempts
+
 
+
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Add Entry =====
+
| style="border-width: 0.0069in medium 0.0069in 0.0069in;  border-style: solid none solid solid; border-color: rgb(0, 0, 255) -moz-use-text-color rgb(0, 0, 255) rgb(0, 0, 255);  padding: 0in 0.075in; text-align: center" | '''&nbsp;Add Entry'''<br/>
 +
| style="border:0.0069in solid #0000ff; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | Enter the IP addresses you wish to be ignored by the PBX in regards to failed SIP registration attempts.
 +
|}
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Enter the IP addresses you wish to be ignored by the PBX in regards to failed SIP registration attempts.
+
==== Configure Log Watch/Ban Service ====
  
|}
 
==== Configure Log Watch/Ban Service ====
 
 
'''STEPS:'''
 
'''STEPS:'''
  
# Navigate to PBX SetupGeneral.
+
#Navigate to PBX Setup=>General.
# Scroll down to the '''Security Settings '''panel, set the parameters based on your general business requirements.
+
#Scroll down to the '''Security Settings '''panel, set the parameters based on your general business requirements.
# Click the button to save the changes.
+
#Click the [[File:savechanges.png]] button to save the changes.
# Navigate to the '''PBX Setup''''''General''' page. Locate the '''Admin Settings''' section (located at the top of the page).
+
#Navigate to the '''PBX Setup'''=>'''General''' page. Locate the '''Admin Settings''' section (located at the top of the page).
# Enter an IP address for '''Admin Email Address''' field. Depending on whether you have Unified Messaging configured, the PBX will send an email to this address any time that it bans an IP address. See the Unified Messaging section of this guide for details on how to configure this parameter.
+
#Enter an IP address for '''Admin Email Address''' field. Depending on whether you have Unified Messaging configured, the PBX will send an email to this address any time that it bans an IP address. See the Unified Messaging section of this guide for details on how to configure this parameter.
# Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
+
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
  
{| style="border-spacing:0;"
 
| style="border-top:0.0069in solid #000000;border-bottom:0.0069in solid #000000;border-left:0.0069in solid #000000;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"|
 
| style="border-top:0.0069in solid #000000;border-bottom:0.0069in solid #000000;border-left:none;border-right:0.0069in solid #000000;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| '''IMPORTANT: Please contact IPitomy’s Technical Support Group if you need further assistance by email at [mailto:support@ipitomy.com support@ipitomy.com] or phone 941-306-2200 option 2. You can also search the FAQ page on our website at [http://www.ipitomy.com/ www.ipitomy.com].'''
 
  
 +
{| style="border-spacing:0"
 +
|-
 +
| style="border-top:0.0069in solid #000000; border-bottom:0.0069in solid #000000; border-left:0.0069in solid #000000; border-right:none; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" |
 +
| style="border-top:0.0069in solid #000000; border-bottom:0.0069in solid #000000; border-left:none; border-right:0.0069in solid #000000; padding-top:0in; padding-bottom:0in; padding-left:0.075in; padding-right:0.075in" | '''IMPORTANT: Please contact IPitomy’s Technical Support Group if you need further assistance by email at [mailto:support@ipitomy.com support@ipitomy.com] or phone 941-306-2200 option 2. You can also search the FAQ page on our website at [http://www.ipitomy.com/ www.ipitomy.com].'''
 
|}
 
|}
 +
 
==== Disable Log Set Security Setting ====
 
==== Disable Log Set Security Setting ====
 +
 
'''STEPS:'''
 
'''STEPS:'''
  
# From the '''PBX Setup'''''' General System Setup '''page, locate the '''Security Settings '''panel.
+
#From the '''PBX Setup=>General System Setup '''page, locate the '''Security Settings '''panel.
# Disable the security setting by selecting “No” from the drop-down list for the '''Log Watch Ban Service.'''
+
#Disable the security setting by selecting “No” from the drop-down list for the '''Log Watch Ban Service.'''
# Click the button to save the changes.
+
#Click the button to save the changes.
# Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
+
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
 
=== Time Settings Section ===
 
=== Time Settings Section ===
 
+
[[File:timesettings.png|center]]
 
{| style="border-spacing:0;"
 
{| style="border-spacing:0;"
 
| style="background-color:#b8cce4;border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Sections/Fields'''</center>
 
| style="background-color:#b8cce4;border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Sections/Fields'''</center>
| style="background-color:#b8cce4;border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| <center>'''Description'''</center>
+
| style="background-color:#b8cce4;border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:2.5in;padding-right:0.075in;"| '''Description'''
  
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Current System Time =====
+
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Current System Time
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the current time of the PBX system.
+
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:1.5in;padding-right:0.075in;"| This is the current time of the PBX system.
  
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Synchronize =====
+
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Synchronize  
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Clicking this button will cause the PBX to sync to the time server. This will result in a restart of services, interrupting calls. If the time is off by more than an hour, we advise you to reboot the PBX after synchronization.
+
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:1.5in;padding-right:0.075in;"| Clicking this button will cause the PBX to sync to the time server. This will result in a restart of services, interrupting calls. If the time is off by more than an hour, we advise you to reboot the PBX after synchronization.
  
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Timezone =====
+
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Timezone  
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the time zone for the PBX system.
+
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:1.5in;padding-right:0.075in;"| This is the time zone for the PBX system.
  
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Network Time Server =====
+
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Network Time Server  
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| This is the location of the PBX time server. If nothing is entered in the field, the PBX is using the default value of time.nist.gov.
+
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:1.5in;padding-right:0.075in;"| This is the location of the PBX time server. If nothing is entered in the field, the PBX is using the default value of time.nist.gov.
  
 
|-
 
|-
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| ===== Time Server Info =====
+
| style="border-top:0.0069in solid #0000ff;border-bottom:0.0069in solid #0000ff;border-left:0.0069in solid #0000ff;border-right:none;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Time Server Info
  
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:0.075in;padding-right:0.075in;"| Below the Network Time Server field is a display showing information about the system’s connection to its time server.
+
| style="border:0.0069in solid #0000ff;padding-top:0in;padding-bottom:0in;padding-left:1.5in;padding-right:0.075in;"| Below the Network Time Server field is a display showing information about the system’s connection to its time server.
  
 
|}
 
|}
 
==== Set Time Settings ====
 
==== Set Time Settings ====
 +
 
'''STEPS:'''
 
'''STEPS:'''
  
# From the '''PBX Setup'''''' General System Setup '''page, locate the '''Time Settings '''panel.
+
#From the '''PBX Setup=> General System Setup '''page, locate the '''Time Settings '''panel.
# Set the Timezone to match your location.  
+
#Set the Timezone to match your location.
# If needed, set the Network Time Server to the desired address. Typically the default value will work.
+
#If needed, set the Network Time Server to the desired address. Typically the default value will work.
# Click the button to save the changes.
+
#Click the [[File:savechanges.png]] button to save the changes.
# Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
+
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
 
=== Outbound Transfers Numbers Section ===
 
=== Outbound Transfers Numbers Section ===
Line 244: Line 218:
  
 
Use the Transfer Permissions setting to define where calls may be transferred to. Internal Only restricts the transfers to extensions only. If you set it to an extension, then you can transfer anywhere that extension could, following the Class of Service for outbound dialing.
 
Use the Transfer Permissions setting to define where calls may be transferred to. Internal Only restricts the transfers to extensions only. If you set it to an extension, then you can transfer anywhere that extension could, following the Class of Service for outbound dialing.
 
+
[[File:outboundtransfer.jpg|center]]
 
==== Add Outbound Transfers ====
 
==== Add Outbound Transfers ====
 +
 
'''STEPS:'''
 
'''STEPS:'''
  
# From the '''PBX Setup'''''' General System Setup '''page, locate the '''Outbound Transfer Numbers '''section.
+
#From the '''PBX Setup'''=>'''General System Setup '''page, locate the '''Outbound Transfer Numbers '''section.
# To in the box to the left of the '''Add''' button, enter the phone number you wish to be able to use this transfer feature. Click '''Add''' to move the number to the list. Repeat this step for all the numbers you want to add.
+
#To in the box to the left of the '''Add''' button, enter the phone number you wish to be able to use this transfer feature. Click '''Add''' to move the number to the list. Repeat this step for all the numbers you want to add.
# Select the desired permission from the Transfer Permissions drop-down list.
+
#Select the desired permission from the Transfer Permissions drop-down list.
# Click the button to save the changes.
+
#Click the [[File:savechanges.png]] button to save the changes.
# Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
+
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
 
==== Delete Outbound Transfers ====
 
==== Delete Outbound Transfers ====
 +
 
'''STEPS:'''
 
'''STEPS:'''
  
# From the '''PBX Setup''''''General System Setup '''page, locate the '''Outbound Transfer Numbers '''section.
+
#From the '''PBX Setup'''=>'''General System Setup '''page, locate the '''Outbound Transfer Numbers '''section.
# From the list of transferable numbers, click on the number(s) that you want to delete. You can use the '''SHIFT''' or '''CTRL''' button to select multiple numbers on the list.
+
#From the list of transferable numbers, click on the number(s) that you want to delete. You can use the '''SHIFT''' or '''CTRL''' button to select multiple numbers on the list.
# Click the '''DEL''' button. The selected numbers are removed from the list .
+
#Click the '''DEL''' button. The selected numbers are removed from the list .
# Click the button to save the changes.
+
#Click the [[File:Savechanges.png]] button to save the changes.
# Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
+
#Click the '''Apply Changes''' link located at the top right hand corner of the page, to commit the changes to the database.
  
 
=== InGenius Connector ===
 
=== InGenius Connector ===
InGenius is a 3<sup>rd</sup> party software licensable on the IPitomy PBX. The settings under PBX SetupGeneral are where you would configure the user name and password InGenius. Contact IPitomy for more information.
+
 
 +
InGenius is a 3<sup>rd</sup> party software licensable on the IPitomy PBX. The settings under PBX Setup=>General are where you would configure the user name and password InGenius. Contact IPitomy for more information.
 +
[[File:ingeniusconnector.png|center]]

Latest revision as of 10:22, 1 April 2014



Logo on white background (small).gif
support@ipitomy.com | 941.306.2200 (Opt 2 for Support)
You are viewing the IPitomy IP PBX Manual, Table of Contents.


Contents

PBX Setup

PBX setup is used by a System Administrator to manage system-specific and system-wide settings. Typically these pages will be visited once during installation, and then won’t be changed in the future.

General System Setup

While not visited often, the General settings page pertains to some core PBX components, like administrator Username and Password, Time Settings, System Operator, Mailbox Exit Destination, Directory Type, Autoprovisioning, and Security Settings.

Adminsettingssection.png

Admin Settings Section

Sections/Fields
Description
Admin User Name The administrator user name for the PBX system, default is pbxadmin
Admin Password The administrator password for the PBX system, default is ipitomy. Once installed, we recommend you change this to a strong password.
Re-type Admin Password This requires that you re-enter the password to confirm that they match.
Admin Email Address This is the email address where administrative alerts will be sent. Email Alerts are triggered when IP Addresses have been Banned as part of the Log, Watch and Ban feature.

Edit Admin Settings

STEPS:

  1. From the PBX Setup->General System Setup page, locate the Admin Settings section.
  2. Enter the administrative information required.
  3. Click the Savechanges.png button to save the changes.
  4. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.

General Settings Section

Generalsettingssection.png

Sections/Fields
Description
System Operator
This is the default destination that callers will go to when pressing ‘0’ while in a voicemail box, if Allow Operator is enabled on the voicemail box. Additionally, if an extension dials zero, this will be where they are directed.
Mailbox Exit Destination
This is the default destination for a caller if they press ‘#‘after leaving a voicemail message.
 Directory Type
This determines if the name directory search will use the first or last name.
Cascading Voicemail Notification Interval
This is the frequency with which the PBX will check and send out cascading message notifications.
Default Class of Service
Defines what COS each newly created extension will use unless it is changed.
Branch Class of Service
This is the default COS for a Branch Office using Branch Office Trunking.
 Internal Distinctive Ring
This is the type of ring that will be used for internal calls.
5xi Paging Fix
Enabled (set to YES) this parameter only if IPitomy’s technical support personnel advises.
Park Timeout
This is how long the PBX will wait before timing out to an extension that has a parked call, which if unanswered will failover to the System Operator. Default value is 180 seconds.
Feature Digit Timeout
This is the timeout parameter for the feature code digit press attempts (in milliseconds). Default value is 3000.
Transfer Digit Timeout
This is the timeout parameter for inter-digit timing on feature code based transfers. Default value is 5.
Extension FAX Detect Timer
This is how long, in seconds, the PBX will detect to see if a call ringing to an extension is a fax. The setting is enabled under extension settings. Default value is 4.5.
Auto-Provisioning
While auto-provisioning is Running, users may use the phone-based auto-provisioning mechanism in IPitomy phones to assign or create extensions. Click on to start, and Off to stop the service. This does not require saving or applying changes.

Edit General PBX Settings

STEPS:

  1. From the PBX Setup->General System Setup page, locate the General Settings section.
  2. Enter the information required for the PBX Security settings
  3. Click the Savechanges.png button to save the changes.
  4. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.

Security Settings Section

Log Watch/Ban Service

This feature allows the PBX to monitor the SIP registration traffic and ban any IP address that makes 5 failed registration attempts. The IP address will be banned for either 3 days or until the service is restarted. Configuration settings allow you to ignore (not monitor) IP addresses that are communicating from the LocalNet, as well as allowing you to manually add addresses you want the system to ignore. If you set up an Admin Email Address under PBX Setup=>General and have Unified Messaging configured, the PBX will send you an email any time an IP address is banned via this feature. Follow this link to see what a Ban Email will look like.


Pbxsecurity.png

Enable Log Watch/Ban Service

STEPS:

  1. From the PBX Setup->General System Setup page, locate the Security Settings section.
  2. Enable the Log Watch Ban Service by setting the parameter to “Yes” on the drop-down list.
  3. Click the Savechanges.png button to save the changes.
  4. Scroll back to the Log Watch Ban Service panel and click the Reload button.

Set Log Watch/Ban Service Parameters

Once you have enabled the Log Watch/Ban Services, you will be able to configure the parameters for the security settings.
Seclogwatch.png
The following table describes the parameters and descriptions (recommended settings) for the Log Watch and Ban feature.


Sections/Fields
Description
Service is currently Running
This indicates the status of the service, either Running or Not Running.
Reload Button
Restarts the Ban service, clearing any existing banned IP addresses.
 Enable Log Watch & Ban Service
Set to Yes and the PBX will monitor failed SIP registration attempts. 5 failed attempts and the IP is blocked for:
  • 3days
  • Until system reboot
  • Until Reload button is clicked


 Ignore IPs in SIP LocalNets
Set to Yes and the PBX will ignore failed SIP registration attempts from IPs from the LocalNets configured in the system. When set to No, IP addresses from the LocalNets are ignored for failed attempts.
Ignoring Addresses
Lists the addresses that were manually entered to be ignored in regards to failed SIP registration attempts
 Add Entry
Enter the IP addresses you wish to be ignored by the PBX in regards to failed SIP registration attempts.

Configure Log Watch/Ban Service

STEPS:

  1. Navigate to PBX Setup=>General.
  2. Scroll down to the Security Settings panel, set the parameters based on your general business requirements.
  3. Click the Savechanges.png button to save the changes.
  4. Navigate to the PBX Setup=>General page. Locate the Admin Settings section (located at the top of the page).
  5. Enter an IP address for Admin Email Address field. Depending on whether you have Unified Messaging configured, the PBX will send an email to this address any time that it bans an IP address. See the Unified Messaging section of this guide for details on how to configure this parameter.
  6. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.


IMPORTANT: Please contact IPitomy’s Technical Support Group if you need further assistance by email at support@ipitomy.com or phone 941-306-2200 option 2. You can also search the FAQ page on our website at www.ipitomy.com.

Disable Log Set Security Setting

STEPS:

  1. From the PBX Setup=>General System Setup page, locate the Security Settings panel.
  2. Disable the security setting by selecting “No” from the drop-down list for the Log Watch Ban Service.
  3. Click the button to save the changes.
  4. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.

Time Settings Section

Timesettings.png
Sections/Fields
Description
Current System Time This is the current time of the PBX system.
Synchronize Clicking this button will cause the PBX to sync to the time server. This will result in a restart of services, interrupting calls. If the time is off by more than an hour, we advise you to reboot the PBX after synchronization.
Timezone This is the time zone for the PBX system.
Network Time Server This is the location of the PBX time server. If nothing is entered in the field, the PBX is using the default value of time.nist.gov.
Time Server Info Below the Network Time Server field is a display showing information about the system’s connection to its time server.

Set Time Settings

STEPS:

  1. From the PBX Setup=> General System Setup page, locate the Time Settings panel.
  2. Set the Timezone to match your location.
  3. If needed, set the Network Time Server to the desired address. Typically the default value will work.
  4. Click the Savechanges.png button to save the changes.
  5. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.

Outbound Transfers Numbers Section

This setting allows outside numbers, such as cell phones or land lines, which receive calls through the PBX to press ## to transfer the call. Once connected, the call can be transferred to someone else at the office or another number, depending on configuration. Simply ask them to hold, then press ##. After a moment the PBX will say “Transfer”, after which you can dial the number where the call should be transferred to. Any numbers listed here will be able to perform this type of transfer.

Use the Transfer Permissions setting to define where calls may be transferred to. Internal Only restricts the transfers to extensions only. If you set it to an extension, then you can transfer anywhere that extension could, following the Class of Service for outbound dialing.

Outboundtransfer.jpg

Add Outbound Transfers

STEPS:

  1. From the PBX Setup=>General System Setup page, locate the Outbound Transfer Numbers section.
  2. To in the box to the left of the Add button, enter the phone number you wish to be able to use this transfer feature. Click Add to move the number to the list. Repeat this step for all the numbers you want to add.
  3. Select the desired permission from the Transfer Permissions drop-down list.
  4. Click the Savechanges.png button to save the changes.
  5. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.

Delete Outbound Transfers

STEPS:

  1. From the PBX Setup=>General System Setup page, locate the Outbound Transfer Numbers section.
  2. From the list of transferable numbers, click on the number(s) that you want to delete. You can use the SHIFT or CTRL button to select multiple numbers on the list.
  3. Click the DEL button. The selected numbers are removed from the list .
  4. Click the Savechanges.png button to save the changes.
  5. Click the Apply Changes link located at the top right hand corner of the page, to commit the changes to the database.

InGenius Connector

InGenius is a 3rd party software licensable on the IPitomy PBX. The settings under PBX Setup=>General are where you would configure the user name and password InGenius. Contact IPitomy for more information.

Ingeniusconnector.png
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox