Difference between revisions of "IS710 Door Box"

From IPitomy Wiki
Jump to navigation Jump to search
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
'''IPitomy Door Box Quick Setup Guide'''
 
'''IPitomy Door Box Quick Setup Guide'''
  
 +
[[File:IS710v2 Smart Sercurity IP Intercom User Manual.doc|File:IS710v2 Smart Sercurity IP Intercom User Manual.doc]]
  
 +
*The Ipitomy IS710 Door box comes by Default configured to a Static IP of
  
*The Ipitomy IS710 Door box comes by Default configured to a Static IP of
+
<br/>192.168.1.153
  
 
192.168.1.153
 
  
  
 
*On First login make sure Language is set to English using the drop down on the left.
 
*On First login make sure Language is set to English using the drop down on the left.
  
 
+
<br/>It is reccomended to connect to this IP address and then step one would be to configure for DHCP the network Settings.
It is reccomended to connect to this IP address and then step one would be to configure for DHCP the network Settings.
 
  
  
Line 32: Line 31:
  
  
*Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system, make sure the delay is set to 0. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.  
+
*Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system, make sure the delay is set to 0. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.
  
  
Line 41: Line 40:
  
 
The operation is defined as, User presses Center call button on Door box, Unit Hot dials the Extension or group defined under Hotdial, and the answering party dials 00 which activates the door open current.
 
The operation is defined as, User presses Center call button on Door box, Unit Hot dials the Extension or group defined under Hotdial, and the answering party dials 00 which activates the door open current.
 +
 +
 +
 +
 +
 +
'''NEW IP710-01 Door Box Setup Guide'''
 +
 +
*The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100&nbsp; &nbsp; &nbsp; It is reccomended to connect to this IP address and then configure for DHCP in the Network settings.
 +
*Use the WAN port if you are using POE
 +
*Use the LAN port if you are connecting direct power to the door box
 +
 +
[[File:IP710-ui.jpg]]
 +
 +
SIP Account: Display Name and User Name should be the extension number.&nbsp; The Password field should be the SIP password found in the Advanced Extension Settings on the PBX.&nbsp; SIP Server should be the IP Address of the PBX.
 +
 +
The button on the front of the door box is Key1, the other programmable keys are not used

Latest revision as of 16:17, 4 December 2017

IPitomy Door Box Quick Setup Guide

File:IS710v2 Smart Sercurity IP Intercom User Manual.doc

  • The Ipitomy IS710 Door box comes by Default configured to a Static IP of


192.168.1.153


  • On First login make sure Language is set to English using the drop down on the left.


It is reccomended to connect to this IP address and then step one would be to configure for DHCP the network Settings.


File:One.jpg


  • Step Two Configure Extension


Simply Create an Extension for the Doorbox in the PBX, set the Phone Type to IPitomy 2XX. Then using Auto- Discovery find the device by scanning the network and configure in the normal Auto Discovery Method.


File:Two.jpg


  • Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system, make sure the delay is set to 0. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.


File:Three.jpg


The operation is defined as, User presses Center call button on Door box, Unit Hot dials the Extension or group defined under Hotdial, and the answering party dials 00 which activates the door open current.



NEW IP710-01 Door Box Setup Guide

  • The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100      It is reccomended to connect to this IP address and then configure for DHCP in the Network settings.
  • Use the WAN port if you are using POE
  • Use the LAN port if you are connecting direct power to the door box

IP710-ui.jpg

SIP Account: Display Name and User Name should be the extension number.  The Password field should be the SIP password found in the Advanced Extension Settings on the PBX.  SIP Server should be the IP Address of the PBX.

The button on the front of the door box is Key1, the other programmable keys are not used