Difference between revisions of "NexVortex"

From IPitomy Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Below is the last known working configuration we had with NexVortex. Their portal can be found at [http://www.nexvortex.com http://www.nexvortex.com]. Be sure to verify the host, username, secret, and call limit with the provider before starting configuration to ensure the process runs as smoothly as possible. This is a basic configuration to get the trunks working, there are many optional fields that you may want to configure as well depending on the specific application.
+
Below is the last known working configuration we had with NexVortex. Their portal can be found at [http://www.nexvortex.com http://www.nexvortex.com]. Be sure to verify the host, username, secret, and call limit with the provider before starting configuration to ensure the process runs as smoothly as possible. This is a basic configuration to get the trunks working, there are many optional fields that you may want to configure as well depending on the specific application.  If you have a static IP, you won't need to register with a user/pass, just provide your public IP to nexvortex and they will authenticate from that.  If you need to use a host name, provide nexvortex with that domain and they can authenticate that way without registration.
  
 
*With NexVortex, you will need to enable DNSSRV Lookup, found under PBX Setup=SIP=Advanced
 
*With NexVortex, you will need to enable DNSSRV Lookup, found under PBX Setup=SIP=Advanced
 +
 +
NOTE: When using DNS SRV Lookup, you should be the host to nexvortex.com
  
 
[[File:NexVortex -ConfigPage1.jpg|File:NexVortex -ConfigPage1.jpg]]
 
[[File:NexVortex -ConfigPage1.jpg|File:NexVortex -ConfigPage1.jpg]]
  
 
[[File:NexVortex -ConfigPage2.jpg|File:NexVortex -ConfigPage2.jpg]]
 
[[File:NexVortex -ConfigPage2.jpg|File:NexVortex -ConfigPage2.jpg]]

Latest revision as of 21:38, 21 September 2015

Below is the last known working configuration we had with NexVortex. Their portal can be found at http://www.nexvortex.com. Be sure to verify the host, username, secret, and call limit with the provider before starting configuration to ensure the process runs as smoothly as possible. This is a basic configuration to get the trunks working, there are many optional fields that you may want to configure as well depending on the specific application. If you have a static IP, you won't need to register with a user/pass, just provide your public IP to nexvortex and they will authenticate from that. If you need to use a host name, provide nexvortex with that domain and they can authenticate that way without registration.

  • With NexVortex, you will need to enable DNSSRV Lookup, found under PBX Setup=SIP=Advanced

NOTE: When using DNS SRV Lookup, you should be the host to nexvortex.com

File:NexVortex -ConfigPage1.jpg

File:NexVortex -ConfigPage2.jpg