Difference between revisions of "Router Info"

From IPitomy Wiki
Jump to navigation Jump to search
Line 1: Line 1:
== Mikrotik ==
+
This page contains general information about port forwarding and disabling application layer gateways on particular routers.
 +
 
 +
= Mikrotik<br/> =
  
 
This router has an ALG that can be disabled with the following command
 
This router has an ALG that can be disabled with the following command
Line 7: Line 9:
 
The info was found at the following two links [http://wiki.mikrotik.com/wiki/Manual:IP/Services Mikrotik Wiki] [http://forum.mikrotik.com/viewtopic.php?f=13&t=56265 Mikrotik Forum]
 
The info was found at the following two links [http://wiki.mikrotik.com/wiki/Manual:IP/Services Mikrotik Wiki] [http://forum.mikrotik.com/viewtopic.php?f=13&t=56265 Mikrotik Forum]
  
== Fortigate ==
+
= Fortigate<br/> =
  
 
I found this online about solving issues with Fortigate routers and NO AUDIO with remote SIP:
 
I found this online about solving issues with Fortigate routers and NO AUDIO with remote SIP:

Revision as of 16:24, 26 February 2013

This page contains general information about port forwarding and disabling application layer gateways on particular routers.

Mikrotik

This router has an ALG that can be disabled with the following command

  • /ip firewall service-port disable sip

The info was found at the following two links Mikrotik Wiki Mikrotik Forum

Fortigate

I found this online about solving issues with Fortigate routers and NO AUDIO with remote SIP:

In the command line of the fortigate type the following:

  • config system settings
  • set sip-helper disable
  • set sip-nat-trace disable

Reboot the device

In the command line type the following:

  • config system session-helper
  • show

(now look for SIP, mostly it will be "12")

  • delete 12

Don't use any protection profiles on the firewall of the sip rules.

Cisco Pix 506/501/515

This is for Pix 506/501/515 but it should work with any Cisco Pix, and possibly other Cisco
routers.
  1. access-list 101 permit udp any host 64.238.XXX.XXX range 10000 20000
    (Note: Replace 64.238.XXX.XXX with your public IP assigned to be forwarded to the IPitomy PBX)
  2. access-list 101 permit tcp any host 64.238.XXX.XXX range 10000 20000
    (Note: Replace 64.238.XXX.XXX with your public IP assigned to be forwarded to the IPitomy PBX)
  3. static (inside,outside) 64.238.XXX.XX 172.16.2.129 netmask 255.255.255.255 0 0
    (Note: Replace 64.238.XXX.XXX with users public IP, replace the 172.16.2.129 with users private IP that is assigned to the IPitomy PBX)
  4. no fixup protocol sip 5060
  5. no fixup protocol sip udp 5060