Difference between revisions of "Yealink"

Revision as of 15:55, 7 November 2013

When configuring the Park key manually, set the type to DTMF, and the value to ##700#.
When configuring a Record key manually, set the type to DTMF, and the value to *#
When configuring the Day/Night key manually, set the type to BLF and the value to ff.

Under the DDS key tab is a link for Line Keys. Be sure to set the Line Keys to Account 1 if you want them to function as a line key, otherwise you can configure them just like any other programmable key.

T38G firmware version fixes an issue with Parked calls bonding with other calls incorrectly. Extract the .rom from the Zip folder and load it into the phone.

To set up multicast on your Yealink phone:

Log into GUI interface of phone via IP Address
Navigate to Contacts=>MulticastIP
Populate the Listening Address field with the mutlicast IP of the multicast group built in the PBX, follower by a colon and the port configured for the group.
- eg. 225.5.5.5:1235
Populate the Label field with a name that will display on the LCD when paged by the multicast group

@@ Line 11: / Line 11: @@
 *T38G firmware version fixes an issue with Parked calls bonding with other calls incorrectly.&nbsp; Extract the .rom from the Zip folder and load it into the phone.
+==Multicast==
+To set up multicast on your Yealink phone:
+*Log into GUI interface of phone via IP Address
+*Navigate to Contacts=>MulticastIP
+*Populate the Listening Address field with the mutlicast IP of the multicast group built in the PBX, follower by a colon and the port configured for the group.
+**eg.  225.5.5.5:1235
+*Populate the Label field with a name that will display on the LCD when paged by the multicast group
 [[File:38.70.0.143.zip|File:38.70.0.143.zip]]