Difference between revisions of "Yealink"

From IPitomy Wiki
Jump to navigation Jump to search
Line 19: Line 19:
 
**eg.  225.5.5.5:1235
 
**eg.  225.5.5.5:1235
 
*Populate the Label field with a name that will display on the LCD when paged by the multicast group
 
*Populate the Label field with a name that will display on the LCD when paged by the multicast group
 +
*Click the Confirm key and your settings will be saved, allowing the phone to receive multicast pages.
  
 
===Fixes===
 
===Fixes===

Revision as of 15:57, 7 November 2013

Manual Configuration Guide

Yealink T38G Manual Configuration Guide

Additional programming tips:

Keys

  • When configuring the Park key manually, set the type to DTMF, and the value to ##700#.
  • When configuring a Record key manually, set the type to DTMF, and the value to *#
  • When configuring the Day/Night key manually, set the type to BLF and the value to ff.
  • Under the DDS key tab is a link for Line Keys. Be sure to set the Line Keys to Account 1 if you want them to function as a line key, otherwise you can configure them just like any other programmable key.


Multicast

To set up multicast on your Yealink phone:

  • Log into GUI interface of phone via IP Address
  • Navigate to Contacts=>MulticastIP
  • Populate the Listening Address field with the mutlicast IP of the multicast group built in the PBX, follower by a colon and the port configured for the group.
    • eg. 225.5.5.5:1235
  • Populate the Label field with a name that will display on the LCD when paged by the multicast group
  • Click the Confirm key and your settings will be saved, allowing the phone to receive multicast pages.

Fixes

  • T38G firmware version fixes an issue with Parked calls bonding with other calls incorrectly.  Extract the .rom from the Zip folder and load it into the phone.

File:38.70.0.143.zip