Barix Instreamer - Revision history

Mike Lunn: /* Streaming Overhead Music */

2016-02-03T19:03:39Z

Streaming Overhead Music

2016-02-03T18:59:46Z

Streaming Overhead Music

2016-02-03T18:59:35Z

Streaming Music on Hold

2016-02-03T18:58:10Z

2016-02-03T18:56:13Z

Streaming Overhead Music

2016-02-03T18:55:58Z

Streaming Music on Hold

2016-02-03T18:55:31Z

Streaming Music on Hold

2016-02-03T18:54:46Z

Streaming Music on Hold

2016-02-03T18:50:46Z

2016-02-03T18:50:03Z

Streaming Overhead Music

@@ Line 29: / Line 29: @@
 === Streaming Overhead Music ===
-For this set up, you'll be setting the Barix as a Multicast source, and setting your IPitomy SIP Speaker to listen on that [[IP_PBX_Manual_Destinations_Groups#Multicast_Paging_Group|multicast]] address/port.
+For this set up, you'll be setting the Barix as a Multicast source, and setting your IPitomy SIP Speaker to listen on that [[IP_PBX_Manual_Destinations_Groups#Multicast_Paging_Group|multicast]] address/port.  When used to stream music you can also use the same speaker for paging if you use a Multicast Page Group.  Do not use a normal ring group to page, as the streaming music will not restart.
 #Log into the Barix device via the static IP that was set on initial setup

@@ Line 34: / Line 34: @@
 #Navigate to Configuration=>Advanced=>Audio and set as follows. NOTE: A/D amplifier gain can be adjusted as needed [[File:Barix ULAW.jpg|File:Barix ULAW.jpg]]
 #Click Apply
-#Navigate to Configuration=>Advanced=>Streaming and set as follows [[File:Barix Streaming Overhead.jpg|File:Barix Streaming Overhead.jpg]]
+#Navigate to Configuration=>Advanced=>Streaming and set as follows. NOTE: Own Name, Radio Path, and icy-genre names are arbitrary [[File:Barix Streaming Overhead.jpg|File:Barix Streaming Overhead.jpg]]
 #Click Apply

@@ Line 24: / Line 24: @@
 #Navigate to Configuration=>Advanced=>Audio and set as follows. NOTE: A/D amplifier gain can be adjusted as needed [[File:Barix Audio MP3.jpg|File:Barix Audio MP3.jpg]]
 #Click Apply
-#Navigate to Configuration=>Advanced=>Streaming and set as follows.  [[File:Barix Streaming MOH.jpg|File:Barix Streaming MOH.jpg]]
+#Navigate to Configuration=>Advanced=>Streaming and set as follows. NOTE: Own Name, Radio Path, and icy-genre names are arbitrary  [[File:Barix Streaming MOH.jpg|File:Barix Streaming MOH.jpg]]
 #Click Apply

@@ Line 1: / Line 1: @@
 __TOC__
-The Barix Instreamer is a 3rd party device that allows you to connect a stereo RCA source on one side, and the network on the other side. With this setup, you can set the Barix as your source for the PBX to stream Music On Hold, or you can use it as a Multicast source for the IPitomy SIP Speaker to stream music overhead. You can purchase the Barix Instreamer from the following link: [http://shop.lineq.com/Instreamer_c_15.html http://shop.lineq.com/Instreamer_c_15.html]
+The Barix Instreamer is a 3rd party device that allows you to connect a stereo RCA source on one side, and the network on the other side. With this setup, you can set the Barix as your source for the PBX to stream Music On Hold, OR you can use it as a Multicast source for the IPitomy SIP Speaker to stream music overhead. If you want to do both, you'll need 2 Barix Instreamers (if using one RCA source, you'll need to split each channel to provide the same stream to each Barix).  You can purchase the Barix Instreamer from the following link: [http://shop.lineq.com/Instreamer_c_15.html http://shop.lineq.com/Instreamer_c_15.html]
 === First Time Setup ===

@@ Line 32: / Line 32: @@
 #Log into the Barix device via the static IP that was set on initial setup
-#Navigate to Configuration=>Advanced=>Audio and set as follows [[File:Barix ULAW.jpg|File:Barix ULAW.jpg]]
+#Navigate to Configuration=>Advanced=>Audio and set as follows. NOTE: A/D amplifier gain can be adjusted as needed [[File:Barix ULAW.jpg|File:Barix ULAW.jpg]]
 #Click Apply
 #Navigate to Configuration=>Advanced=>Streaming and set as follows [[File:Barix Streaming Overhead.jpg|File:Barix Streaming Overhead.jpg]]
 #Click Apply

@@ Line 19: / Line 19: @@
 === Streaming Music on Hold ===
-For this setup, you'll need to create a Streaming MOH [[IP PBX Manual PBXSetup Music On Hold#Music on Hold|Playlist]]. You'll need to set the URL to the static IP address you set for the Barix.
+For this setup, you'll need to create a Streaming MOH [[IP PBX Manual PBXSetup Music On Hold#Music on Hold|Playlist]]. You'll need to set the URL for the playlist to the static IP address you set for the Barix.
 #Log into the Barix device via the static IP that was set on initial setup

← Older revision		Revision as of 18:50, 3 February 2016
Line 1:		Line 1:
		+	__TOC__
		+
	The Barix Instreamer is a 3rd party device that allows you to connect a stereo RCA source on one side, and the network on the other side. With this setup, you can set the Barix as your source for the PBX to stream Music On Hold, or you can use it as a Multicast source for the IPitomy SIP Speaker to stream music overhead. You can purchase the Barix Instreamer from the following link: [http://shop.lineq.com/Instreamer_c_15.html http://shop.lineq.com/Instreamer_c_15.html]		The Barix Instreamer is a 3rd party device that allows you to connect a stereo RCA source on one side, and the network on the other side. With this setup, you can set the Barix as your source for the PBX to stream Music On Hold, or you can use it as a Multicast source for the IPitomy SIP Speaker to stream music overhead. You can purchase the Barix Instreamer from the following link: [http://shop.lineq.com/Instreamer_c_15.html http://shop.lineq.com/Instreamer_c_15.html]