IS710 Door Box - Revision history

Mike Lunn at 16:17, 4 December 2017

2017-12-04T16:17:46Z

Mike Lunn at 19:44, 1 December 2017

2017-12-01T19:44:21Z

Mike Lunn at 22:17, 30 November 2017

2017-11-30T22:17:26Z

Mike Lunn at 22:17, 30 November 2017

2017-11-30T22:17:02Z

Mike Lunn at 21:58, 30 November 2017

2017-11-30T21:58:50Z

Mike Lunn at 13:39, 3 May 2017

2017-05-03T13:39:00Z

Mike Lunn at 16:48, 20 April 2016

2016-04-20T16:48:22Z

Mike Lunn at 16:35, 25 March 2016

2016-03-25T16:35:53Z

John Wolfe: Created page with "'''IPitomy Door Box Quick Setup Guide''' The Ipitomy IS710 Door box comes by Default configured to a Static IP of 192.168.1.153 On First login make sure Language is ..."

2015-03-20T16:52:45Z

Created page with "'''IPitomy Door Box Quick Setup Guide''' The Ipitomy IS710 Door box comes by Default configured to a Static IP of 192.168.1.153 On First login make sure Language is ..."

New page

'''IPitomy Door Box Quick Setup Guide'''

The Ipitomy IS710 Door box comes by Default configured to a Static IP of

192.168.1.153

On First login make sure Language is set to English using the drop down on the left.

It is reccomended to connect to this IP address and then step one would be to configure for DHCP the network Settings.

[[File:One.jpg|File:One.jpg]]

Step Two Configure Extension

Simply Create an Extension for the Doorbox in the PBX. Then using Auto- Discovery find the device by scanning the network and configure in the normal Auto Discovery Method.

[[File:Two.jpg|File:Two.jpg]]

Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.

[[File:Three.jpg|File:Three.jpg]]

The operation is defined as, User presses Center call button on Door box, Unit Hot dials the Extension or group defined under Hotdial, and the answering party dials 00 which activates the door open current.

@@ Line 47: / Line 47: @@
 '''NEW IP710-01 Door Box Setup Guide'''
-*The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100&nbsp; &nbsp; &nbsp; It is reccomended to connect to this IP address and then configure for DHCP the network Settings.
+*The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100&nbsp; &nbsp; &nbsp; It is reccomended to connect to this IP address and then configure for DHCP in the Network settings.
 *Use the WAN port if you are using POE
 *Use the LAN port if you are connecting direct power to the door box

@@ Line 47: / Line 47: @@
 '''NEW IP710-01 Door Box Setup Guide'''
-*The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100
+*The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100&nbsp; &nbsp; &nbsp; It is reccomended to connect to this IP address and then configure for DHCP the network Settings.
 *Use the WAN port if you are using POE
 *Use the LAN port if you are connecting direct power to the door box

@@ Line 47: / Line 47: @@
 '''NEW IP710-01 Door Box Setup Guide'''
-*The New IP710-01 Door Boxes will have astatic IP address of 192.168.1.100
+*The New IP710-01 Door Boxes will have a static IP address of 192.168.1.100
 *Use the WAN port if you are using POE
 *Use the LAN port if you are connecting direct power to the door box

← Older revision		Revision as of 22:17, 30 November 2017
Line 46:		Line 46:

	'''NEW IP710-01 Door Box Setup Guide'''		'''NEW IP710-01 Door Box Setup Guide'''
		+
		+	*The New IP710-01 Door Boxes will have astatic IP address of 192.168.1.100
		+	*Use the WAN port if you are using POE
		+	*Use the LAN port if you are connecting direct power to the door box

@@ Line 3: / Line 3: @@
 [[File:IS710v2 Smart Sercurity IP Intercom User Manual.doc|File:IS710v2 Smart Sercurity IP Intercom User Manual.doc]]
 *The Ipitomy IS710 Door box comes by Default configured to a Static IP of
 *On First login make sure Language is set to English using the drop down on the left.
+<br/>It is reccomended to connect to this IP address and then step one would be to configure for DHCP the network Settings.
@@ Line 32: / Line 31: @@
 *Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system, make sure the delay is set to 0. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.
@@ Line 41: / Line 40: @@
 The operation is defined as, User presses Center call button on Door box, Unit Hot dials the Extension or group defined under Hotdial, and the answering party dials 00 which activates the door open current.

← Older revision		Revision as of 16:48, 20 April 2016
Line 32:		Line 32:


−	*Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.	+	*Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system, make sure the delay is set to 0. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.

@@ Line 3: / Line 3: @@
-The Ipitomy IS710 Door box comes by Default configured to a Static IP of
+*The Ipitomy IS710 Door box comes by Default configured to a Static IP of
@@ Line 10: / Line 9: @@
+*On First login make sure Language is set to English using the drop down on the left.
@@ Line 23: / Line 20: @@
-Step Two Configure Extension
+*Step Two Configure Extension
-Simply Create an Extension for the Doorbox in the PBX. Then using Auto- Discovery find the device by scanning the network and configure in the normal Auto Discovery Method.
+Simply Create an Extension for the Doorbox in the PBX, set the Phone Type to IPitomy 2XX. Then using Auto- Discovery find the device by scanning the network and configure in the normal Auto Discovery Method.
@@ Line 35: / Line 32: @@
-Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.
+*Once the Extension is registered with the PBX, the you can setup the Hotdial. This can be a Group or Extension in the system. When the button on the doorbox is pressed, then this will be the group or the extension which is called. The code to dial to send the open command to the output contacts by default is 00. This is defined under DTMF.