Polycom - Revision history

Mike Lunn at 18:38, 19 May 2016

2016-05-19T18:38:22Z

Mike Lunn: /* Polycom IP7000 Set up for IPitomy */

2016-01-27T14:49:21Z

Polycom IP7000 Set up for IPitomy

Mike Lunn at 23:17, 25 February 2014

2014-02-25T23:17:43Z

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-25T23:16:59Z

Polycom VVX500 Configuration

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-24T20:48:27Z

Polycom VVX500 Configuration

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-24T20:40:53Z

Polycom VVX500 Configuration

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-24T19:54:08Z

Polycom VVX500 Configuration

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-24T19:46:02Z

Polycom VVX500 Configuration

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-24T19:42:44Z

Polycom VVX500 Configuration

Mike Lunn: /* Polycom VVX500 Configuration */

2014-02-24T16:15:07Z

Polycom VVX500 Configuration

@@ Line 90: / Line 90: @@
 *Under Utilities: Line Key Configuration
 *Program any speed dial, BLF, or additional keys for the phone.
 Note: This will also restart the phone.

@@ Line 17: / Line 17: @@
 *Via the Phone’s web page make these changes: Type IP address of the IP 7000 in browser and log in under admin password.
-Sip Server> Server 1 Address: PRESS Save
+Sip Server> Server 1 Address: Set to the PBX IP and Press Save
 *Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes.

@@ Line 66: / Line 66: @@
 *Select Additional Preferences
 *Under Preferences enable One Touch Voicemail
 [[File:Vvx500-b.jpg|File:Vvx500-b.jpg]]
-'''Note:''' This will restart the phone.
 *Under Settings/Lines

@@ Line 41: / Line 41: @@
 The following outlines how a dealer configured his VVX500 phones to work with the IPitomy PBX.
 *Browse to ip address of Polycom.
 *Select Simple setup.
 *Populate the following fields with the appropriate information
 **SNTP Server = north-america.pool.ntp.org
 **SIP Server
-***Address = <IP Address of the PBX>
+***Address = &lt;IP Address of the PBX&gt;
 ***Port = 5060
 **SIP Outbound Proxy
-***Address = <IP Address of the PBX>
+***Address = &lt;IP Address of the PBX&gt;
 ***Port = 5060
 **SIP Line Identification
-***Display Name = <Name of the Extension>
+***Display Name = &lt;Name of the Extension&gt;
-***Address = <Extension Number>
+***Address = &lt;Extension Number&gt;
-***Authentication User ID = <Extension Number>
+***Authentication User ID = &lt;Extension Number&gt;
-***Authentication Password = <SIP Password>
+***Authentication Password = &lt;SIP Password&gt;
 ***Label = Name of the Extension
@@ Line 61: / Line 61: @@
 '''Note:''' Authentication password is SIP password from Advanced screen of extension.
 *Select Additional Preferences
 *Under Preferences enable One Touch Voicemail
 '''Note:''' This will restart the phone.
@@ Line 72: / Line 76: @@
 **This will place 2 line appearances on the Polycom VVX phone.
 *Optional: Change SIP and Proxy server to UDPonly
 *Under Settings/Lines/Message Center:
@@ Line 77: / Line 83: @@
 *Change Callback mode to Contact
 *Callback Contact: 923
 *Under Utilities: Line Key Configuration
@@ Line 82: / Line 90: @@
 Note: This will also restart the phone.
 === Older Guides with Useful Information ===

@@ Line 70: / Line 70: @@
 *Change number of line keys from default 1 to 2
 *Change Calls per line from 24 to 1
-*This will place 2 line appearances on the Polycom VVX phone.
+**This will place 2 line appearances on the Polycom VVX phone.
-**Optional: Change SIP and Proxy server to UDPonly
+*Optional: Change SIP and Proxy server to UDPonly
 *Under Settings/Lines/Message Center:

@@ Line 58: / Line 58: @@
 ***Label = Name of the Extension
-Note: SIP server is either local address on Ipitomy server or public ip address for remote phone. Note: Authentication password is SIP password from Advanced screen of extension.
+'''Note:''' SIP server will either be the LAN IP for local phones or the WAN IP for remote phones.
 *Under Preferences enable one touch voicemail

@@ Line 40: / Line 40: @@
 The following outlines how a dealer configured his VVX500 phones to work with the IPitomy PBX.
-#Browse to ip address of Polycom. Select Simple setup.
+Browse to ip address of Polycom. Select Simple setup.
-#Fill in fields as shown in example above.
+*Fill in fields as shown in example above.
 Note: SIP server is either local address on Ipitomy server or public ip address for remote phone.
 Note: Authentication password is SIP password from Advanced screen of extension.
-#Under Preferences enable one touch voicemail
+*Under Preferences enable one touch voicemail
 Note: This will restart the phone.
-#Under Settings/Lines
+*Under Settings/Lines
-#Change number of line keys from default 1 to 2
+*Change number of line keys from default 1 to 2
-#Change Calls per line from 24 to 1
+*Change Calls per line from 24 to 1
-#This will place 2 line appearances on the Polycom VVX phone.
+*This will place 2 line appearances on the Polycom VVX phone.
-##Optional: Change SIP and Proxy server  to  UDPonly
+**Optional: Change SIP and Proxy server  to  UDPonly
-#Also under Settings/Lines/Message Center:
+*Also under Settings/Lines/Message Center:
-#Add user extension in Subscription Address
+*Add user extension in Subscription Address
-#Change Callback mode to Contact
+*Change Callback mode to Contact
-#Callback Contact: 923
+*Callback Contact: 923
-#Under Utilities:  Line Key Configuration
+*Under Utilities:  Line Key Configuration
-#Add BLF/Speed Numbers
+*Add BLF/Speed Numbers
 Note: This will also restart the phone.
 === Older Guides with Useful Information ===