Multi Port PRI Configuration: Difference between revisions

Revision as of 17:05, 12 March 2014

When configuring Mutliple PRI Cards or one card with Multiple ports, its important to know the following.

D Channel is Always 24
Multiple Port cards increment the start and end channel. So you'd make a channel group for 1-23, then a channel group for 25-47, and so on.
Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card.

@@ Line 1: / Line 1: @@
-[[File:]]
+When configuring Mutliple PRI Cards or one card with Multiple ports, its important to know the following.
+*D Channel is Always 24
+*Multiple Port cards increment the start and end channel.  So you'd make a channel group for 1-23, then a channel group for 25-47, and so on.
-This is a screen capture for a two card 3 port configuration. In this configuration there is a two port T205 Digium Card and a single port T110 Card. The Dual port card is thei first card and the single port card is configured as card 2. Note that the D channel is the same on all three. This is due to the 2 ports of the dual port using the common D Channel. And the single port card is also using 24 but this is the D channel within its circuit.
+*Channel numbering starts over when you have a second card.  So you'd start over with a channel group for 1-23 for the second card.