Polycom: Difference between revisions
No edit summary |
|||
| Line 1: | Line 1: | ||
Just as any other SIP phone, you can manually configure Polycom phones to work with the IPitomy PBX. | Just as any other SIP phone, you can manually configure Polycom phones to work with the IPitomy PBX. Below are some guides created by ourselves and dealers who have gotten their phones to work. | ||
===Polycom IP7000 Set up for IPitomy=== | === Polycom IP7000 Set up for IPitomy === | ||
Admin password is 456 via the phone programming or web interface. | Admin password is 456 via the phone programming or web interface. | ||
| Line 10: | Line 10: | ||
*From phone keypad, navigate these menus: | *From phone keypad, navigate these menus: | ||
Main Menu / Settings / Advanced / Admin Settings / Reset to Default | |||
Press: Reset Local Configuration | Main Menu / Settings / Advanced / Admin Settings / Reset to Default Press: Reset Local Configuration | ||
*Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes. | *Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes. | ||
*Via the Phone’s web page make these changes: Type IP address of the IP 7000 in browser and log in under admin password. | *Via the Phone’s web page make these changes: Type IP address of the IP 7000 in browser and log in under admin password. | ||
Sip Server> | |||
Server 1 | Sip Server> Server 1 Address: PRESS Save | ||
Address: | |||
PRESS Save | |||
*Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes. | *Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes. | ||
*Via the Phone’s web page make these changes: | *Via the Phone’s web page make these changes: | ||
LINES> | |||
Line 1 | LINES> Line 1 Display Name: extension number Address: extension number Auth User ID: extension number Auth Password: SIP Password Transport: UDP Only | ||
Display Name: extension number | |||
Address: extension number | |||
Auth User ID: extension number | |||
Auth Password: SIP Password | |||
Transport: UDP Only | |||
*Server 1 | *Server 1 | ||
Address: PBX IP | |||
Port: 5060 | Address: PBX IP Port: 5060 Register: 1 | ||
Register: 1 | |||
*PRESS SUBMIT | *PRESS SUBMIT | ||
| Line 43: | Line 35: | ||
*For voicemail message indicator light service: | *For voicemail message indicator light service: | ||
Message Center | Message Center Subscriber: extension number@default [example:400@default ] Callback Mode: Registration | ||
Subscriber: extension number@default [example:400@default ] | |||
Callback Mode: Registration | [[File:Polycom Configuration Guide.doc|File:Polycom Configuration Guide.doc]] | ||
Revision as of 15:51, 20 May 2013
Just as any other SIP phone, you can manually configure Polycom phones to work with the IPitomy PBX. Below are some guides created by ourselves and dealers who have gotten their phones to work.
Polycom IP7000 Set up for IPitomy
Admin password is 456 via the phone programming or web interface.
It is especially important to wait until the phone finishes restarting after each Save or submit!
In the following instructions, only enter information in the indicated fields. Leave the rest blank or whatever the default is.
- From phone keypad, navigate these menus:
Main Menu / Settings / Advanced / Admin Settings / Reset to Default Press: Reset Local Configuration
- Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes.
- Via the Phone’s web page make these changes: Type IP address of the IP 7000 in browser and log in under admin password.
Sip Server> Server 1 Address: PRESS Save
- Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes.
- Via the Phone’s web page make these changes:
LINES> Line 1 Display Name: extension number Address: extension number Auth User ID: extension number Auth Password: SIP Password Transport: UDP Only
- Server 1
Address: PBX IP Port: 5060 Register: 1
- PRESS SUBMIT
- Wait for the phone to completely finish restarting. And also wait for the phone’s web server to come back. This will take at least 2 minutes.
- For voicemail message indicator light service:
Message Center Subscriber: extension number@default [example:400@default ] Callback Mode: Registration