USB Install Dongle

From IPitomy Wiki
Revision as of 20:20, 21 May 2013 by Mike Lunn (talk | contribs) (Created page with "== Creating a USB Install Dongle == You'll find both the LiveUSBCreator.zip file and the Install.iso file here: [http://www.ipitomy.com/webrelease/USB_Disk/install_disk/ htt...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Creating a USB Install Dongle

You'll find both the LiveUSBCreator.zip file and the Install.iso file here:

http://www.ipitomy.com/webrelease/USB_Disk/install_disk/

Download the file, LiveUSBCreator.zip and extract it's contents. This will create a folder called LiveUSBCreator Download the file, Install.iso. Put this file in the newly created LiveUSBCreator folder Put a formated, empty 1GB USB drive in the system Enter the folder: LiveUSBCreator Double click on file: liveusb-creator.exe


File:001.jpg

The USB drive letter should be visible in the "Target Device" box. If not, then select it from the list. Click the [Browse] button under "Use existing Live CD" Browse to and select " Install .iso" Click [Open]


File:002.jpg

Click [Create Live USB]


File:003.jpg

After a few minutes, the Install USB will have been created:


File:004.jpg

Click the [X] in the upper right corner to close the program and properly eject the USB drive from the system