Difference between revisions of "Forwarding Gateway"

From IPitomy Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
Changing Forwarding Settings Remotely<br/>1. Select &lt; Menus &gt; Under Destinations<br/>2. Select Service from the drop down menu in the menu using a specific single digit menu programming number or symbol to select the detination type.<br/>3. Select Forwarding Gateway from the<br/>drop down menu.<br/>4. Save and apply changes. Now when a caller wants to call in remotely to change their forwarding parameters; enable/disable/forwarding number, they will be prompted through the process after selecting the appropriate single digt that has been assigned - in this case it is the Asterisk/Star symbol.
+
Changing Forwarding Settings Remotely<br/>1. Select &lt; Menus &gt; Under Destinations<br/>2. Select Service from the drop down menu in the menu using a specific single digit menu programming number or symbol to select the detination type.<br/>3. Select Forwarding Gateway from the drop down menu.<br/>4. Save and apply changes.  
 +
 
 +
Now when a caller wants to call in remotely to change their forwarding parameters; enable/disable/forwarding number, they will be prompted through the process after selecting the appropriate single digt that has been assigned - in this case it is the Asterisk/Star symbol.
 +
 
 +
NOTE: To forward the original caller's callerID along with the call itself, go under Call Routing=>Outgoing, choose the appropriate route that matches the forwarding setting (10 digit, 11 digit, etc), and enable Force Use PSTN CID.
  
  
  
 
[[File:Fgateway1.jpg|File:Fgateway1.jpg]]
 
[[File:Fgateway1.jpg|File:Fgateway1.jpg]]

Latest revision as of 15:02, 19 February 2016

Changing Forwarding Settings Remotely
1. Select < Menus > Under Destinations
2. Select Service from the drop down menu in the menu using a specific single digit menu programming number or symbol to select the detination type.
3. Select Forwarding Gateway from the drop down menu.
4. Save and apply changes.

Now when a caller wants to call in remotely to change their forwarding parameters; enable/disable/forwarding number, they will be prompted through the process after selecting the appropriate single digt that has been assigned - in this case it is the Asterisk/Star symbol.

NOTE: To forward the original caller's callerID along with the call itself, go under Call Routing=>Outgoing, choose the appropriate route that matches the forwarding setting (10 digit, 11 digit, etc), and enable Force Use PSTN CID.


File:Fgateway1.jpg