HD Phone Firmware Release Notes

IPitomy HD Phone Firmware Release Notes - Packages 1.8.29 11/19/2012

• Bug Fixes
  • Fixed Issue where Personal Phonebook was deleted on Reboot.
  • Fixed issue with Caller ID Name being lost after call was answered and 2nd call came in on some phone models
  • Reject option should now properly show on all incoming calls
  • Fixed issue where CID was not always displayed on 2nd incoming call
  • Improvied integrity checking of auto-update process

Note do not be alarmed if your phone upgrades twice. For V1 phones there is an intermediate upgrade that provides additional integrity checking on firmware upgrades that is installed first.

IPitomy HD Phone Firmware Release Notes Package 1.8-21 9/10/2012 

This update fixes a minor problem that cause 220's to not automatically upgrade their firmware.  The last release did not have any major fixes for IP220s so this should not have a major impact.  If you want to upgrade your IP220s immediately, click Check Now under Automated Firmware updates on the PBXSetup->Phone Global.

IPitomy HD Phone Firmware Release Notes Package 1.8-19 9/06/2012 

This updates software for IP210, IP410, IP320, IP330, and IP620 to 2.2.8.3-3648. IP220 and IP320v2 are updated to 2.2.7.9-2018

Bug Fixes all phones

1. Resolved issue with transferring to voicemail failing in rare cases.
2. In some cases a call ringing the phone could be transferred when pressing a BLF,

this has been resolved

Applicable Hardware

• IP220, IP320v2, IP620, IP320, IP330, IP210, IP410

IPitomy HD Phone Firmware Release Notes Package 1.8-15 7/05/2012 

This updates software for IP210, IP410, IP320, IP330, and IP620 to 2.2.7.4-3503. IP220 and IP320v2 are updated to 2.2.7.7-1856

Note 1.8-15 corrects error in 1.8-14 and properly includes 2.2.7.4 for non-v2 phones.

Bug Fixes (For IP220 and IP320v2)

1. Fixed issue with sending DTMF tones during early media. Now functions correctly on all phones.
2. Fixed issue with call transfers from Ring Group - if attended transfer was hung up before connecting (i.e. to perform a Blind transfer without pressing Blind key) then the call could fail to connect to voicemail if it went unanswered. This issue effected only Applicable Hardware listed below.
3. Fixed date display on IP320v2. Month and Day were reversed.
4. IP220v2 Incoming call display is now correctly formatted.
5. Resolved issue with QoS parameters - configuration files are now backwards compatible with this parameter.

Bug Fixes ( IP210, IP410, IP320, IP330, and IP620 to 2.2.7.4-3503) 1. Resolved issue where dial tone could be played continuously on a phone due to a

race condition during call collisions.

Applicable Hardware

• IP220, IP320v2, IP620, IP320, IP330, IP210, IP410

IPitomy HD Phone Firmware Release Notes Package 1.8-14 6/22/2012 

This updates software for IP210, IP410, IP320, IP330, and IP620 to 2.2.7.4-3503. IP220 and IP320v2 are updated to 2.2.7.7-1856

Bug Fixes (For IP220 and IP320v2)

1. Fixed issue with sending DTMF tones during early media. Now functions correctly on all phones.
2. Fixed issue with call transfers from Ring Group - if attended transfer was hung up before connecting (i.e. to perform a Blind transfer without pressing Blind key) then the call could fail to connect to voicemail if it went unanswered. This issue effected only Applicable Hardware listed below.
3. Fixed date display on IP320v2. Month and Day were reversed.
4. IP220v2 Incoming call display is now correctly formatted.
5. Resolved issue with QoS parameters - configuration files are now backwards compatible with this parameter.

Bug Fixes ( IP210, IP410, IP320, IP330, and IP620 to 2.2.7.4-3503) 1. Resolved issue where dial tone could be played continuously on a phone due to a

race condition during call collisions.

Applicable Hardware

• IP220, IP320v2, IP620, IP320, IP330, IP210, IP410

IPitomy HD Phone Firmware Release Notes v 2.2.7.6 6/19/2012 

Bug Fixes

1. Fixed issue with sending DTMF tones during early media. Now functions correctly on all phones.
2. Fixed issue with call transfers from Ring Group - if attended transfer was hung up before connecting (i.e. to perform a Blind transfer without pressing Blind key) then the call could fail to connect to voicemail if it went unanswered. This issue effected only Applicable Hardware listed below.
3. Fixed date display on IP320v2. Month and Day were reversed.
4. IP220v2 Incoming call display is now correctly formatted.
5. Resolved issue with QoS parameters - configuration files are now backwards compatible with this parameter.

Applicable Hardware

• IP220, IP320v2

IPitomy HD Phone Firmware Release Notes v 2.2.7.5 6/5/2012 

Bug Fixes

1. Issue where dialing slowly while receiving an incoming call could cause phone to reset is now resolved
2. Issue with firmware file corruption during update is resolved. Once a phone is running this software, if a phone is unplugged or interrupted while updating it’s firmware, it will attempt to re-download the firmware on reboot. Note that the server holding the firmware file (PBX ) needs to be accessible to the phone. If the phone fails to update it defaults back to 192.168.0.200 and can be recovered through telnet. However, rebooting the phone will cause the phone to attempt to download the firmware from it’s last known good location again.
3. Fixed issue with being unable to retrieve call on hold if other lines are ringing in. Now pressing the line key for call on hold, retrieves the call. Other incoming calls will continue to ring.
4. Various other minor fixes.

Features Added

1. Missed Calls setting. This allows user to disable displaying the missed calls. When the phone is called and does not answer. This is useful for ring groups. Note this setting is not on the PBX but you can Edit the phone configuration template and add the following attribute to the call node: MisscallDisEnable="0" or MisscallDisEnable="1". 0 hides missed calls, 1 displays missed calls.

IPitomy HD Phone Firmware Release Notes v 2.2.7.2 4/25/2012 

Bug Fixes

1. Issue where dialing slowly while receiving an incoming call could cause phone to reset is now resolved
2. Issue with firmware file corruption during update is resolved. Once a phone is running this software, if a phone is unplugged or interrupted while updating it’s firmware, it will attempt to re-download the firmware on reboot. Note that the server holding the firmware file (PBX ) needs to be accessible to the phone. If the phone fails to update it defaults back to 192.168.0.200 and can be recovered through telnet. However, rebooting the phone will cause the phone to attempt to download the firmware from it’s last known good location again.
3. Fixed issue with being unable to retrieve call on hold if other lines are ringing in. Now pressing the line key for call on hold, retrieves the call. Other incoming calls will continue to ring.
4. CID display on IP620 fixed. Previously a ‘:’ in the cid name could cause name to not display.
5. Various other minor fixes.

Features Added

1. Missed Calls setting. This allows user to disable displaying the missed calls. When the phone is called and does not answer. This is useful for ring groups. Note this setting is not on the PBX but you can Edit the phone configuration template and add the following attribute to the call node: MisscallDisEnable="0" or MisscallDisEnable="1". 0 hides missed calls, 1 displays missed calls.

Applicable Hardware

• IP210, IP320, IP330, IP410, IP620