Difference between revisions of "PBX Quick Start"

From IPitomy Wiki
Jump to navigation Jump to search
 
(19 intermediate revisions by the same user not shown)
Line 6: Line 6:
 
First, you will select "Add Ipitomy", and then check "Dynamic".
 
First, you will select "Add Ipitomy", and then check "Dynamic".
  
Add the Information provided to you in the ticket.  This will include Username, Password, and Domain.
+
Add the Information provided to you in the ticket.  This will include Username, Password, and Domain.  Submit, and Close.  The Authenticated SIP trunks are now added.
 
[[File:Siptrunk.png|frame|alt=|center]]
 
[[File:Siptrunk.png|frame|alt=|center]]
 +
[[File:Siptruk2.png|center|frame]]
  
 +
 +
 +
 +
 +
=== Adding Ipitomy Static SIP Trunks ===
 +
Select "Add Ipitomy", and then check "Static".  Submit, and Close.  The Static SIP trunks are now added.
 +
[[File:Siptrunk3.png|frame|alt=|center]]
 +
 +
 +
 +
== Get Public IP Address ==
 +
 +
=== Premise based PBX ===
 +
Navigate to PBX Setup > SIP.  Then select IP Address, and click the button to "Get Public IP".  Ave, and Apply Changes.
 +
[[File:Ipaddress.png|center|frame]]
 +
 +
== Adding Ipitomy SIP Trunks to Access Control, and Log Watch and Ban ==
 +
If you have an Access Control List or have Log Watch and Ban turned on, be sure to add the Ipitomy SIP Trunks to the "ignore" lists.
 +
[[File:Access.png|center|frame]]Navigate to PBX Setup >General, and see if Log Watch + Ban is enabled.  Add the SIP Trunks, and save and apply.[[File:Logwatch.png|center|frame|
 +
 +
 +
]]
  
  

Latest revision as of 15:02, 29 March 2022

Setup Checklist

Adding Ipitomy SIP Trunks

Adding Authenticated IpitomySIP Trunk

First, you will select "Add Ipitomy", and then check "Dynamic".

Add the Information provided to you in the ticket. This will include Username, Password, and Domain. Submit, and Close. The Authenticated SIP trunks are now added.

Siptruk2.png



Adding Ipitomy Static SIP Trunks

Select "Add Ipitomy", and then check "Static". Submit, and Close. The Static SIP trunks are now added.


Get Public IP Address

Premise based PBX

Navigate to PBX Setup > SIP. Then select IP Address, and click the button to "Get Public IP". Ave, and Apply Changes.

Ipaddress.png

Adding Ipitomy SIP Trunks to Access Control, and Log Watch and Ban

If you have an Access Control List or have Log Watch and Ban turned on, be sure to add the Ipitomy SIP Trunks to the "ignore" lists.

Access.png

Navigate to PBX Setup >General, and see if Log Watch + Ban is enabled. Add the SIP Trunks, and save and apply.

Logwatch.png


Setup Worksheet

See the setup worksheet in the link as a useful tool to plan your install. File:IPitomy Setup Worksheet.xls


Set PBX IP address according to final destination network.

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking

 

IF pbx is set up with final network IP address, set up localnet, and then ACL

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking#Access_Control_List

 

Create and register at least 2 extensions, place test call between them to ensure calls are working

http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery

 

Build rest of extensions/destinations

http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro

 

IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery

 

Set up trunks (SIP, PRI/Analog Card, Gateway, etc)

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders

 

IF NEEDED, ensure router port forwarding OR 1:1 NAT is set up

http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig

 

Test inbound and outbound calls

Security Best Practices

Tech Update Security

Backups

We recommend for all sites that you set up to do automated backups of the database to FTP, this way if anything goes wrong you have a recent backup file saved off from the PBX to restore on your spare.

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_PBXSetup_Database#Create_Backup_Section