PBX Quick Start

From IPitomy Wiki
Jump to navigation Jump to search

Setup Checklist

Adding Ipitomy SIP Trunks

Adding Authenticated IpitomySIP Trunk

First, you will select "Add Ipitomy", and then check "Dynamic".

Add the Information provided to you in the ticket. This will include Username, Password, and Domain.















Setup Worksheet

See the setup worksheet in the link as a useful tool to plan your install. File:IPitomy Setup Worksheet.xls


Set PBX IP address according to final destination network.

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking

 

IF pbx is set up with final network IP address, set up localnet, and then ACL

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking#Access_Control_List

 

Create and register at least 2 extensions, place test call between them to ensure calls are working

http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery

 

Build rest of extensions/destinations

http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro

 

IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery

 

Set up trunks (SIP, PRI/Analog Card, Gateway, etc)

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders

 

IF NEEDED, ensure router port forwarding OR 1:1 NAT is set up

http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig

 

Test inbound and outbound calls

Security Best Practices

Tech Update Security

Backups

We recommend for all sites that you set up to do automated backups of the database to FTP, this way if anything goes wrong you have a recent backup file saved off from the PBX to restore on your spare.

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_PBXSetup_Database#Create_Backup_Section