PBX Quick Start

Setup Checklist

Set PBX IP address according to final destination network.

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking

 

IF pbx is set up with final network IP address, set up localnet, and then ACL

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminSystemNetworking#Access_Control_List

 

Create and register at least 2 extensions, place test call between them to ensure calls are working

http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery

 

Build rest of extensions/destinations

http://wiki.ipitomy.com/wiki/IPPBX_IMM_SystemAdminDestinationsIntro

 

IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions

http://wiki.ipitomy.com/wiki/IP_PBX_Manual_Extensions#Auto-Discovery

 

Set up trunks (SIP, PRI/Analog Card, Gateway, etc)

http://wiki.ipitomy.com/wiki/IPPBX_IMM_AdminProviders

 

IF NEEDED, ensure router port forwarding OR 1:1 NAT is set up

http://wiki.ipitomy.com/wiki/IPPBX_IMM_DataNetworkConfig