PBX Quick Start
Adding Ipitomy SIP Trunks
Adding Authenticated IpitomySIP Trunk
First, you will select "Add Ipitomy", and then check "Dynamic".
Add the Information provided to you in the ticket. This will include Username, Password, and Domain. Submit, and Close. The Authenticated SIP trunks are now added.
Adding Ipitomy Static SIP Trunks
Select "Add Ipitomy", and then check "Static". Submit, and Close. The Static SIP trunks are now added.
Get Public IP Address
Premise based PBX
Navigate to PBX Setup > SIP. Then select IP Address, and click the button to "Get Public IP". Ave, and Apply Changes.
Adding Ipitomy SIP Trunks to Access Control, and Log Watch and Ban
If you have an Access Control List or have Log Watch and Ban turned on, be sure to add the Ipitomy SIP Trunks to the "ignore" lists.
See the setup worksheet in the link as a useful tool to plan your install. File:IPitomy Setup Worksheet.xls
Set PBX IP address according to final destination network.
IF pbx is set up with final network IP address, set up localnet, and then ACL
Create and register at least 2 extensions, place test call between them to ensure calls are working
Build rest of extensions/destinations
IF pbx is set up with final network IP address, auto-discover phones and assign them to extensions
Set up trunks (SIP, PRI/Analog Card, Gateway, etc)
IF NEEDED, ensure router port forwarding OR 1:1 NAT is set up
Test inbound and outbound calls
Security Best Practices
We recommend for all sites that you set up to do automated backups of the database to FTP, this way if anything goes wrong you have a recent backup file saved off from the PBX to restore on your spare.