Packet Capture

From IPitomy Wiki
Revision as of 15:41, 10 July 2013 by Mike Lunn (talk | contribs)
Jump to navigation Jump to search

The Packet Capture feature in the PBX is a tool to investigate possible issues on the network. By capturing and analyzing the packets, you can pinpoint where a breakdown is occurring. Some further information on packet captures in general can be found here http://en.wikipedia.org/wiki/Packet_analyzer

  • To view a packet capture, you will need to have Wireshark on your PC. You can also find tutorials on this page to learn to use Wireshark.


  • Found under Diagnostics=>Packet Capture, the feature is off by default.  This is a feature that would only be enable for short periods at a time while you troubleshoot and reproduce an issue, as the capture is saving data to the HD and you don't want to use an excessive amount of storage space.

File:Diagnostic-PacketCaptures1.jpg

  • By clicking On, you start a capture.  You can tell as it will display Running in green.

File:Diagnostic-PacketCaptures2.jpg

  • Once you are done troubleshooting, press Off to stop the capture.  Always stop the service before attempting to download (down arrow button) or delete (X button) the capture. 

File:Diagnostic-PacketCaptures3.jpg