Difference between revisions of "Softphones"

From IPitomy Wiki
Jump to navigation Jump to search
Line 13: Line 13:
 
[[File:Internet Calls.png|File:Internet Calls.png]]
 
[[File:Internet Calls.png|File:Internet Calls.png]]
  
*Select Add Account.  Also this is where you set if the phone is going to keep an active connection so it can receive inbound calls.   
+
*Select Add Account.  Also this is where you set if the phone is going to keep an active connection so it can receive inbound calls. 
  
 
[[File:INternet Calling Settings.png|File:INternet Calling Settings.png]]
 
[[File:INternet Calling Settings.png|File:INternet Calling Settings.png]]
Line 24: Line 24:
  
 
**Server = Public IP of the PBX
 
**Server = Public IP of the PBX
 +
 +
[[File:INternet Call Settings Page.png|File:INternet Call Settings Page.png]]
  
 
*After this its up to you to decide if you want this SIP account used for Outbound Calls
 
*After this its up to you to decide if you want this SIP account used for Outbound Calls

Revision as of 20:52, 26 December 2013

Native Android Soft Phone

The more recent versions of Android software have a built in SIP client (referred to as Internet Call). Below are screenshots from an HTC One running Android 4.3 and how to configure it to work with IPitomy.


  • Navigate to the Phone on your Android Cell
  • Navigate to Settings
  • Find the section for Internet Call Settings and select Accounts (Note: You may want to modify how Internet Calling functions at this point, found under Use Internet Calling)

File:Internet Calls.png

  • Select Add Account.  Also this is where you set if the phone is going to keep an active connection so it can receive inbound calls. 

File:INternet Calling Settings.png

  • Enter in the relavent information
    • Username = Extension Number
    • Password = SIP Password for the Extension
    • Server = Public IP of the PBX

File:INternet Call Settings Page.png

  • After this its up to you to decide if you want this SIP account used for Outbound Calls

Counterpath Xlite Softphone and the IPitomy PBX

Download
Configuration
  •  Launch Xlite and you will see the following window
SoftphonePicture1.png
  • Click Softphone at the top of the phone and select Account Settings 
  • Enter the Extension Number for: Display Name, User Name, and Authorization User Name
  • Enter the SIP Password of the extension in the Password field
  • Enter the appropriate IP address for the PBX under Domain
  • Check the box for ‘Register with domain and receive incoming calls
SoftphonePicture2.png
  • Click OK and the phone will register to the PBX

Congratulations, you have now configured your Xlite softphone to work with the IPitomy PBX.
You should now be able to see that the phone is registered in the PBX under Monitoring, and you
will now be able to make calls.
[Note] In order for DTMF to be correctly recognized, the ext for the Xlite needs to be set to
rfc2833. Since the free Xlite phone only offers one channel, you will not be able to use the Xfer
button on the phone itself. In order to transfer you will need to dial ##<extnum>#.

Bria Softphone Setup

To Successfully set up your Bria Softphone with you IPitomy system, fill out the SIP Account window once you have downloaded the Bria Software.

Your Extension Number which is found under General Settings is used as your User ID followed by the @ symbol and your outside IP address.

SoftphonePicture3.pngSoftphonePicture4.png

Next, Click on the Advanced Settings link, shown on the bottom of the image above and to the left.
Once you have reached Advanced Settings, your SIP password will be accessable through the SIP Password generator. You will click generate and once a numer/letter combination appears, insert this password into your password field in the SIP Account window for the Bria Softphone. 

SoftphonePicture5.pngSoftphonePicture3.png



Congratulations! You have now successfully integrated your IPitomy extension and Bria softphone!

Chat/Presence with Bria

By configuring the XMPP client in your Bria soft phone on your cell phone, you can monitor chat and presence of extensions on your PBX.

Step By Step Guide -Bria xmpp.pdf

  • You will need to "add account" and choose XMPP - Messaging
  • Then configure that acct.
  • AcctName = ext number
  • username = ext num
  • password = Voicemail PIN
  • Domain = locahost
  • Then back out to Account Advanced and set the Outbound Proxy to the PBX IP address
  • Ensure that port 5022 is forwarded from the Router to the PBX internal IP address