Difference between revisions of "Multi Port PRI Configuration"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
*Multiple Port cards increment the start and end channel. So you'd make a channel group for 1-23, then a channel group for 25-47, and so on. | *Multiple Port cards increment the start and end channel. So you'd make a channel group for 1-23, then a channel group for 25-47, and so on. | ||
*Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card. | *Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card. | ||
| + | *Timing increments as you go along on the same card. Span 1 would be timing 1, span 2 would be timing 2, etc. | ||
Latest revision as of 15:32, 20 January 2016
When configuring Mutliple PRI Cards or one card with Multiple ports, its important to know the following.
- D Channel is Always 24
- Multiple Port cards increment the start and end channel. So you'd make a channel group for 1-23, then a channel group for 25-47, and so on.
- Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card.
- Timing increments as you go along on the same card. Span 1 would be timing 1, span 2 would be timing 2, etc.