Multi Port PRI Configuration

From IPitomy Wiki
Jump to: navigation, search

When configuring Mutliple PRI Cards or one card with Multiple ports, its important to know the following.

  • D Channel is Always 24
  • Multiple Port cards increment the start and end channel. So you'd make a channel group for 1-23, then a channel group for 25-47, and so on.
  • Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card.
  • Timing increments as you go along on the same card. Span 1 would be timing 1, span 2 would be timing 2, etc.
Personal tools
Namespaces
Variants
Actions
Navigation
Toolbox