BIOS Settings

From IPitomy Wiki
Revision as of 13:34, 30 December 2022 by Mike Lunn (talk | contribs) (Created page with " '''1)     Get to BIOS. This can be accomplished by repeatedly pressing the delete key when booting a system from off.''' frameless '''If your Screen d...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

1)     Get to BIOS. This can be accomplished by repeatedly pressing the delete key when booting a system from off.

Pic1.png

If your Screen doesn’t look like this then find advanced setup and it should go to this page.

2)     Set the date and time. Time is in 24h (2pm for example is 1400).

Pic2.png

3)     Use the right arrow to get to the advanced tab. Press enter on power Management Setup arrow down to EuP Function and disable it.

Pic3.png

Press escape and arrow down to ACPI Settings

Pic4.png

And disable the suspended sleep state

Pic5.png

Press escape one more time and arrow down to CPU Config

Pic6.png

In here we need to disable intel virtualization tech

Pic7.png

Press escape and right arrow to chipset and find SOC config

Pic8.png

In here you change 2 settings AC Power loss to last state and disable hd audio

Pic9.png

Pic10.png

From here we arrow right to boot setup

Pic11.png

Changes on this page should mirror the image. If the boot mode select does not allow you to change to legacy mode then you need to set the OS system select to manual and change the target os to linex. If USB Flash is the same as USB key if usb flash is not listed as an option in the boot order.

Once your boot page mirrors the image arrow right to exit and hit save and exit. The system will restart.