Difference between revisions of "Multi Port PRI Configuration"

From IPitomy Wiki
Jump to navigation Jump to search
(Created page with "[[File:]] This is a screen capture for a two card 3 port configuration. In this configuration there is a two port T205 Digium Card and a single port T110 Card. The Dual por...")
 
Line 1: Line 1:
[[File:]]
+
When configuring Mutliple PRI Cards or one card with Multiple ports, its important to know the following.
  
 
+
*D Channel is Always 24
 
+
*Multiple Port cards increment the start and end channel.  So you'd make a channel group for 1-23, then a channel group for 25-47, and so on.
This is a screen capture for a two card 3 port configuration. In this configuration there is a two port T205 Digium Card and a single port T110 Card. The Dual port card is thei first card and the single port card is configured as card 2. Note that the D channel is the same on all three. This is due to the 2 ports of the dual port using the common D Channel. And the single port card is also using 24 but this is the D channel within its circuit.
+
*Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card.

Revision as of 17:05, 12 March 2014

When configuring Mutliple PRI Cards or one card with Multiple ports, its important to know the following.

  • D Channel is Always 24
  • Multiple Port cards increment the start and end channel. So you'd make a channel group for 1-23, then a channel group for 25-47, and so on.
  • Channel numbering starts over when you have a second card. So you'd start over with a channel group for 1-23 for the second card.