Troubleshooting: Date Time
Revision as of 17:44, 14 February 2013 by Drew Harrell (talk | contribs) (Created page with "The PBX synchronizes with a time server using NTP in order to maintain accurate time. If your PBX Time is off consistently perform the following steps: #go to PBXSetup->Gene...")
The PBX synchronizes with a time server using NTP in order to maintain accurate time.
If your PBX Time is off consistently perform the following steps:
- go to PBXSetup->General, set the time server, then press save at the bottom of the page and then Apply Changes.
- After that is done click the synchronize button.
- Now go to PBXSetup->Services and Click the button that says Reboot PBX.
We have also seen where keyboards and monitors can effect bus timing if they are malfunctioning. We recommend removing these and then restarting the PBX.